docker安装容器脚本
安装容器脚本
#!/bin/bash
ln -sf ~/kejilion.sh /usr/local/bin/k
ip_address() {
ipv4_address=$(curl -s ipv4.ip.sb)
ipv6_address=$(curl -s --max-time 1 ipv6.ip.sb)
}
install() {
if [ $# -eq 0 ]; then
echo "未提供软件包参数!"
return 1
fi
for package in "$@"; do
if ! command -v "$package" &>/dev/null; then
if command -v apt &>/dev/null; then
apt update -y && apt install -y "$package"
elif command -v yum &>/dev/null; then
yum -y update && yum -y install "$package"
elif command -v apk &>/dev/null; then
apk update && apk add "$package"
else
echo "未知的包管理器!"
return 1
fi
fi
done
return 0
}
install_dependency() {
clear
install wget socat unzip tar
}
remove() {
if [ $# -eq 0 ]; then
echo "未提供软件包参数!"
return 1
fi
for package in "$@"; do
if command -v apt &>/dev/null; then
apt purge -y "$package"
elif command -v yum &>/dev/null; then
yum remove -y "$package"
elif command -v apk &>/dev/null; then
apk del "$package"
else
echo "未知的包管理器!"
return 1
fi
done
return 0
}
break_end() {
echo -e "\033[0;32m操作完成\033[0m"
echo "按任意键继续..."
read -n 1 -s -r -p ""
echo ""
clear
}
kejilion() {
k
exit
}
check_port() {
# 定义要检测的端口
PORT=443
# 检查端口占用情况
result=$(ss -tulpn | grep ":$PORT")
# 判断结果并输出相应信息
if [ -n "$result" ]; then
is_nginx_container=$(docker ps --format '{{.Names}}' | grep 'nginx')
# 判断是否是Nginx容器占用端口
if [ -n "$is_nginx_container" ]; then
echo ""
else
clear
echo -e "\e[1;31m端口 $PORT 已被占用，无法安装环境，卸载以下程序后重试！\e[0m"
echo "$result"
break_end
kejilion
fi
else
echo ""
fi
}
install_add_docker() {
if [ -f "/etc/alpine-release" ]; then
apk update
apk add docker docker-compose
rc-update add docker default
service docker start
else
curl -fsSL https://get.docker.com | sh && ln -s /usr/libexec/docker/cli-plugins/docker-compose /usr/local/bin
systemctl start docker
systemctl enable docker
fi
}
install_docker() {
if ! command -v docker &>/dev/null; then
install_add_docker
else
echo "Docker 已经安装"
fi
}
iptables_open() {
iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT
iptables -F
ip6tables -P INPUT ACCEPT
ip6tables -P FORWARD ACCEPT
ip6tables -P OUTPUT ACCEPT
ip6tables -F
}
add_swap() {
# 获取当前系统中所有的 swap 分区
swap_partitions=$(grep -E '^/dev/' /proc/swaps | awk '{print $1}')
# 遍历并删除所有的 swap 分区
for partition in $swap_partitions; do
swapoff "$partition"
wipefs -a "$partition" # 清除文件系统标识符
mkswap -f "$partition"
done
# 确保 /swapfile 不再被使用
swapoff /swapfile
# 删除旧的 /swapfile
rm -f /swapfile
# 创建新的 swap 分区
dd if=/dev/zero of=/swapfile bs=1M count=$new_swap
chmod 600 /swapfile
mkswap /swapfile
swapon /swapfile
if [ -f /etc/alpine-release ]; then
echo "/swapfile swap swap defaults 0 0" >> /etc/fstab
echo "nohup swapon /swapfile" >> /etc/local.d/swap.start
chmod +x /etc/local.d/swap.start
rc-update add local
else
echo "/swapfile swap swap defaults 0 0" >> /etc/fstab
fi
echo "虚拟内存大小已调整为${new_swap}MB"
}
install_ldnmp() {
new_swap=1024
add_swap
cd /home/web && docker-compose up -d
clear
echo "正在配置LDNMP环境，请耐心稍等……"
# 定义要执行的命令
commands=(
"docker exec nginx chmod -R 777 /var/www/html"
"docker restart nginx > /dev/null 2>&1"
"docker exec php apt update > /dev/null 2>&1"
"docker exec php apk update > /dev/null 2>&1"
"docker exec php74 apt update > /dev/null 2>&1"
"docker exec php74 apk update > /dev/null 2>&1"
# php安装包管理
"curl -sL https://hub.gitmirror.com/https://github.com/mlocati/docker-php-extension-installer/releases/latest/download/install-php-extensions -o /usr/local/bin/install-php-extensions > /dev/null 2>&1"
"docker exec php mkdir -p /usr/local/bin/ > /dev/null 2>&1"
"docker exec php74 mkdir -p /usr/local/bin/ > /dev/null 2>&1"
"docker cp /usr/local/bin/install-php-extensions php:/usr/local/bin/ > /dev/null 2>&1"
"docker cp /usr/local/bin/install-php-extensions php74:/usr/local/bin/ > /dev/null 2>&1"
"docker exec php chmod +x /usr/local/bin/install-php-extensions > /dev/null 2>&1"
"docker exec php74 chmod +x /usr/local/bin/install-php-extensions > /dev/null 2>&1"
# php安装扩展
"docker exec php install-php-extensions mysqli > /dev/null 2>&1"
"docker exec php install-php-extensions pdo_mysql > /dev/null 2>&1"
"docker exec php install-php-extensions gd intl zip > /dev/null 2>&1"
"docker exec php install-php-extensions exif > /dev/null 2>&1"
"docker exec php install-php-extensions bcmath > /dev/null 2>&1"
"docker exec php install-php-extensions opcache > /dev/null 2>&1"
"docker exec php install-php-extensions imagick redis > /dev/null 2>&1"
# php配置参数
"docker exec php sh -c 'echo \"upload_max_filesize=50M \" > /usr/local/etc/php/conf.d/uploads.ini' > /dev/null 2>&1"
"docker exec php sh -c 'echo \"post_max_size=50M \" > /usr/local/etc/php/conf.d/post.ini' > /dev/null 2>&1"
"docker exec php sh -c 'echo \"memory_limit=256M\" > /usr/local/etc/php/conf.d/memory.ini' > /dev/null 2>&1"
"docker exec php sh -c 'echo \"max_execution_time=1200\" > /usr/local/etc/php/conf.d/max_execution_time.ini' > /dev/null 2>&1"
"docker exec php sh -c 'echo \"max_input_time=600\" > /usr/local/etc/php/conf.d/max_input_time.ini' > /dev/null 2>&1"
# php重启
"docker exec php chmod -R 777 /var/www/html"
"docker restart php > /dev/null 2>&1"
# php7.4安装扩展
"docker exec php74 install-php-extensions mysqli > /dev/null 2>&1"
"docker exec php74 install-php-extensions pdo_mysql > /dev/null 2>&1"
"docker exec php74 install-php-extensions gd intl zip > /dev/null 2>&1"
"docker exec php74 install-php-extensions exif > /dev/null 2>&1"
"docker exec php74 install-php-extensions bcmath > /dev/null 2>&1"
"docker exec php74 install-php-extensions opcache > /dev/null 2>&1"
"docker exec php74 install-php-extensions imagick redis > /dev/null 2>&1"
# php7.4配置参数
"docker exec php74 sh -c 'echo \"upload_max_filesize=50M \" > /usr/local/etc/php/conf.d/uploads.ini' > /dev/null 2>&1"
"docker exec php74 sh -c 'echo \"post_max_size=50M \" > /usr/local/etc/php/conf.d/post.ini' > /dev/null 2>&1"
"docker exec php74 sh -c 'echo \"memory_limit=256M\" > /usr/local/etc/php/conf.d/memory.ini' > /dev/null 2>&1"
"docker exec php74 sh -c 'echo \"max_execution_time=1200\" > /usr/local/etc/php/conf.d/max_execution_time.ini' > /dev/null 2>&1"
"docker exec php74 sh -c 'echo \"max_input_time=600\" > /usr/local/etc/php/conf.d/max_input_time.ini' > /dev/null 2>&1"
# php7.4重启
"docker exec php74 chmod -R 777 /var/www/html"
"docker restart php74 > /dev/null 2>&1"
)
total_commands=${#commands[@]} # 计算总命令数
for ((i = 0; i < total_commands; i++)); do
command="${commands[i]}"
eval $command # 执行命令
# 打印百分比和进度条
percentage=$(( (i + 1) * 100 / total_commands ))
completed=$(( percentage / 2 ))
remaining=$(( 50 - completed ))
progressBar="["
for ((j = 0; j < completed; j++)); do
progressBar+="#"
done
for ((j = 0; j < remaining; j++)); do
progressBar+="."
done
progressBar+="]"
echo -ne "\r[$percentage%] $progressBar"
done
echo # 打印换行，以便输出不被覆盖
clear
echo "LDNMP环境安装完毕"
echo "------------------------"
# 获取nginx版本
nginx_version=$(docker exec nginx nginx -v 2>&1)
nginx_version=$(echo "$nginx_version" | grep -oP "nginx/\K[0-9]+\.[0-9]+\.[0-9]+")
echo -n "nginx : v$nginx_version"
# 获取mysql版本
dbrootpasswd=$(grep -oP 'MYSQL_ROOT_PASSWORD:\s*\K.*' /home/web/docker-compose.yml | tr -d '[:space:]')
mysql_version=$(docker exec mysql mysql -u root -p"$dbrootpasswd" -e "SELECT VERSION();" 2>/dev/null | tail -n 1)
echo -n " mysql : v$mysql_version"
# 获取php版本
php_version=$(docker exec php php -v 2>/dev/null | grep -oP "PHP \K[0-9]+\.[0-9]+\.[0-9]+")
echo -n " php : v$php_version"
# 获取redis版本
redis_version=$(docker exec redis redis-server -v 2>&1 | grep -oP "v=+\K[0-9]+\.[0-9]+")
echo " redis : v$redis_version"
echo "------------------------"
echo ""
}
install_certbot() {
install certbot
# 切换到一个一致的目录（例如，家目录）
cd ~ || exit
# 下载并使脚本可执行
curl -O https://raw.gitmirror.com/kejilion/sh/main/auto_cert_renewal.sh
chmod +x auto_cert_renewal.sh
# 设置定时任务字符串
cron_job="0 0 * * * ~/auto_cert_renewal.sh"
# 检查是否存在相同的定时任务
existing_cron=$(crontab -l 2>/dev/null | grep -F "$cron_job")
# 如果不存在，则添加定时任务
if [ -z "$existing_cron" ]; then
(crontab -l 2>/dev/null; echo "$cron_job") | crontab -
echo "续签任务已添加"
else
echo "续签任务已存在，无需添加"
fi
}
install_ssltls() {
docker stop nginx > /dev/null 2>&1
iptables_open
cd ~
certbot certonly --standalone -d $yuming --email your@email.com --agree-tos --no-eff-email --force-renewal
# cp /etc/letsencrypt/live/$yuming/cert.pem /home/web/certs/${yuming}_cert.pem
cp /etc/letsencrypt/live/$yuming/fullchain.pem /home/web/certs/${yuming}_cert.pem
cp /etc/letsencrypt/live/$yuming/privkey.pem /home/web/certs/${yuming}_key.pem
docker start nginx > /dev/null 2>&1
}
default_server_ssl() {
install openssl
openssl req -x509 -nodes -newkey rsa:2048 -keyout /home/web/certs/default_server.key -out /home/web/certs/default_server.crt -days 5475 -subj "/C=US/ST=State/L=City/O=Organization/OU=Organizational Unit/CN=Common Name"
}
nginx_status() {
sleep 1
nginx_container_name="nginx"
# 获取容器的状态
container_status=$(docker inspect -f '{{.State.Status}}' "$nginx_container_name" 2>/dev/null)
# 获取容器的重启状态
container_restart_count=$(docker inspect -f '{{.RestartCount}}' "$nginx_container_name" 2>/dev/null)
# 检查容器是否在运行，并且没有处于"Restarting"状态
if [ "$container_status" == "running" ]; then
echo ""
else
rm -r /home/web/html/$yuming >/dev/null 2>&1
rm /home/web/conf.d/$yuming.conf >/dev/null 2>&1
rm /home/web/certs/${yuming}_key.pem >/dev/null 2>&1
rm /home/web/certs/${yuming}_cert.pem >/dev/null 2>&1
docker restart nginx >/dev/null 2>&1
dbrootpasswd=$(grep -oP 'MYSQL_ROOT_PASSWORD:\s*\K.*' /home/web/docker-compose.yml | tr -d '[:space:]')
docker exec mysql mysql -u root -p"$dbrootpasswd" -e "DROP DATABASE $dbname;" 2> /dev/null
echo -e "\e[1;31m检测到域名证书申请失败，请检测域名是否正确解析或更换域名重新尝试！\e[0m"
fi
}
add_yuming() {
ip_address
echo -e "先将域名解析到本机IP: \033[33m$ipv4_address $ipv6_address\033[0m"
read -p "请输入你解析的域名: " yuming
}
add_db() {
dbname=$(echo "$yuming" | sed -e 's/[^A-Za-z0-9]/_/g')
dbname="${dbname}"
dbrootpasswd=$(grep -oP 'MYSQL_ROOT_PASSWORD:\s*\K.*' /home/web/docker-compose.yml | tr -d '[:space:]')
dbuse=$(grep -oP 'MYSQL_USER:\s*\K.*' /home/web/docker-compose.yml | tr -d '[:space:]')
dbusepasswd=$(grep -oP 'MYSQL_PASSWORD:\s*\K.*' /home/web/docker-compose.yml | tr -d '[:space:]')
docker exec mysql mysql -u root -p"$dbrootpasswd" -e "CREATE DATABASE $dbname; GRANT ALL PRIVILEGES ON $dbname.* TO \"$dbuse\"@\"%\";"
}
reverse_proxy() {
ip_address
wget -O /home/web/conf.d/$yuming.conf https://raw.gitmirror.com/kejilion/nginx/main/reverse-proxy.conf
sed -i "s/yuming.com/$yuming/g" /home/web/conf.d/$yuming.conf
sed -i "s/0.0.0.0/$ipv4_address/g" /home/web/conf.d/$yuming.conf
sed -i "s/0000/$duankou/g" /home/web/conf.d/$yuming.conf
docker restart nginx
}
restart_ldnmp() {
docker exec nginx chmod -R 777 /var/www/html
docker exec php chmod -R 777 /var/www/html
docker exec php74 chmod -R 777 /var/www/html
docker restart nginx
docker restart php
docker restart php74
}
docker_app() {
if docker inspect "$docker_name" &>/dev/null; then
clear
echo "$docker_name 已安装，访问地址: "
ip_address
echo "http:$ipv4_address:$docker_port"
echo ""
echo "应用操作"
echo "------------------------"
echo "1. 更新应用 2. 卸载应用"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
docker rm -f "$docker_name"
docker rmi -f "$docker_img"
$docker_rum
clear
echo "$docker_name 已经安装完成"
echo "------------------------"
# 获取外部 IP 地址
ip_address
echo "您可以使用以下地址访问:"
echo "http:$ipv4_address:$docker_port"
$docker_use
$docker_passwd
;;
2)
clear
docker rm -f "$docker_name"
docker rmi -f "$docker_img"
rm -rf "/home/docker/$docker_name"
echo "应用已卸载"
;;
0)
# 跳出循环，退出菜单
;;
*)
# 跳出循环，退出菜单
;;
esac
else
clear
echo "安装提示"
echo "$docker_describe"
echo "$docker_url"
echo ""
# 提示用户确认安装
read -p "确定安装吗？(Y/N): " choice
case "$choice" in
[Yy])
clear
# 安装 Docker（请确保有 install_docker 函数）
install_docker
$docker_rum
clear
echo "$docker_name 已经安装完成"
echo "------------------------"
# 获取外部 IP 地址
ip_address
echo "您可以使用以下地址访问:"
echo "http:$ipv4_address:$docker_port"
$docker_use
$docker_passwd
;;
[Nn])
# 用户选择不安装
;;
*)
# 无效输入
;;
esac
fi
}
cluster_python3() {
cd ~/cluster/
curl -sS -O https://raw.gitmirror.com/kejilion/python-for-vps/main/cluster/$py_task
python3 ~/cluster/$py_task
}
tmux_run() {
# Check if the session already exists
tmux has-session -t $SESSION_NAME 2>/dev/null
# $? is a special variable that holds the exit status of the last executed command
if [ $? != 0 ]; then
# Session doesn't exist, create a new one
tmux new -s $SESSION_NAME
else
# Session exists, attach to it
tmux attach-session -t $SESSION_NAME
fi
}
while true; do
clear
echo -e "\033[96m_ _ ____ _ _ _ _ ____ _ _ "
echo "|_/ |___ | | | | | | |\ | "
echo "| \_ |___ _| | |___ | |__| | \| "
echo " "
echo -e "\033[96m科技lion一键脚本工具 v2.3.9 （支持Ubuntu/Debian/CentOS/Alpine系统）\033[0m"
echo -e "\033[96m-输入\033[93mk\033[96m可快速启动此脚本-\033[0m"
echo "------------------------"
echo "1. 系统信息查询"
echo "2. 系统更新"
echo "3. 系统清理"
echo "4. 常用工具 ▶"
echo "5. BBR管理 ▶"
echo "6. Docker管理 ▶ "
echo "7. WARP管理 ▶ "
echo "8. 测试脚本合集 ▶ "
echo "9. 甲骨文云脚本合集 ▶ "
echo -e "\033[33m10. LDNMP建站 ▶ \033[0m"
echo "11. 面板工具 ▶ "
echo "12. 我的工作区 ▶ "
echo "13. 系统工具 ▶ "
echo "14. VPS集群控制 ▶ "
echo "------------------------"
echo "p. 幻兽帕鲁开服脚本 ▶"
echo "------------------------"
echo "00. 脚本更新"
echo "------------------------"
echo "0. 退出脚本"
echo "------------------------"
read -p "请输入你的选择: " choice
case $choice in
1)
clear
# 函数: 获取IPv4和IPv6地址
ip_address
if [ "$(uname -m)" == "x86_64" ]; then
cpu_info=$(cat /proc/cpuinfo | grep 'model name' | uniq | sed -e 's/model name[[:space:]]*: //')
else
cpu_info=$(lscpu | grep 'BIOS Model name' | awk -F': ' '{print $2}' | sed 's/^[ \t]*//')
fi
if [ -f /etc/alpine-release ]; then
# Alpine Linux 使用以下命令获取 CPU 使用率
cpu_usage_percent=$(top -bn1 | grep '^CPU' | awk '{print " "$4}' | cut -c 1-2)
else
# 其他系统使用以下命令获取 CPU 使用率
cpu_usage_percent=$(top -bn1 | grep "Cpu(s)" | awk '{print " "$2}')
fi
cpu_cores=$(nproc)
mem_info=$(free -b | awk 'NR==2{printf "%.2f/%.2f MB (%.2f%%)", $3/1024/1024, $2/1024/1024, $3*100/$2}')
disk_info=$(df -h | awk '$NF=="/"{printf "%s/%s (%s)", $3, $2, $5}')
country=$(curl -s ipinfo.io/country)
city=$(curl -s ipinfo.io/city)
isp_info=$(curl -s ipinfo.io/org)
cpu_arch=$(uname -m)
hostname=$(hostname)
kernel_version=$(uname -r)
congestion_algorithm=$(sysctl -n net.ipv4.tcp_congestion_control)
queue_algorithm=$(sysctl -n net.core.default_qdisc)
# 尝试使用 lsb_release 获取系统信息
os_info=$(lsb_release -ds 2>/dev/null)
# 如果 lsb_release 命令失败，则尝试其他方法
if [ -z "$os_info" ]; then
# 检查常见的发行文件
if [ -f "/etc/os-release" ]; then
os_info=$(source /etc/os-release && echo "$PRETTY_NAME")
elif [ -f "/etc/debian_version" ]; then
os_info="Debian $(cat /etc/debian_version)"
elif [ -f "/etc/redhat-release" ]; then
os_info=$(cat /etc/redhat-release)
else
os_info="Unknown"
fi
fi
output=$(awk 'BEGIN { rx_total = 0; tx_total = 0 }
NR > 2 { rx_total += $2; tx_total += $10 }
END {
rx_units = "Bytes";
tx_units = "Bytes";
if (rx_total > 1024) { rx_total /= 1024; rx_units = "KB"; }
if (rx_total > 1024) { rx_total /= 1024; rx_units = "MB"; }
if (rx_total > 1024) { rx_total /= 1024; rx_units = "GB"; }
if (tx_total > 1024) { tx_total /= 1024; tx_units = "KB"; }
if (tx_total > 1024) { tx_total /= 1024; tx_units = "MB"; }
if (tx_total > 1024) { tx_total /= 1024; tx_units = "GB"; }
printf("总接收: %.2f %s\n总发送: %.2f %s\n", rx_total, rx_units, tx_total, tx_units);
}' /proc/net/dev)
current_time=$(date "+%Y-%m-%d %I:%M %p")
swap_used=$(free -m | awk 'NR==3{print $3}')
swap_total=$(free -m | awk 'NR==3{print $2}')
if [ "$swap_total" -eq 0 ]; then
swap_percentage=0
else
swap_percentage=$((swap_used * 100 / swap_total))
fi
swap_info="${swap_used}MB/${swap_total}MB (${swap_percentage}%)"
runtime=$(cat /proc/uptime | awk -F. '{run_days=int($1 / 86400);run_hours=int(($1 % 86400) / 3600);run_minutes=int(($1 % 3600) / 60); if (run_days > 0) printf("%d天 ", run_days); if (run_hours > 0) printf("%d时 ", run_hours); printf("%d分\n", run_minutes)}')
echo ""
echo "系统信息查询"
echo "------------------------"
echo "主机名: $hostname"
echo "运营商: $isp_info"
echo "------------------------"
echo "系统版本: $os_info"
echo "Linux版本: $kernel_version"
echo "------------------------"
echo "CPU架构: $cpu_arch"
echo "CPU型号: $cpu_info"
echo "CPU核心数: $cpu_cores"
echo "------------------------"
echo "CPU占用: $cpu_usage_percent%"
echo "物理内存: $mem_info"
echo "虚拟内存: $swap_info"
echo "硬盘占用: $disk_info"
echo "------------------------"
echo "$output"
echo "------------------------"
echo "网络拥堵算法: $congestion_algorithm $queue_algorithm"
echo "------------------------"
echo "公网IPv4地址: $ipv4_address"
echo "公网IPv6地址: $ipv6_address"
echo "------------------------"
echo "地理位置: $country $city"
echo "系统时间: $current_time"
echo "------------------------"
echo "系统运行时长: $runtime"
echo
;;
2)
clear
# Update system on Debian-based systems
if [ -f "/etc/debian_version" ]; then
apt update -y && DEBIAN_FRONTEND=noninteractive apt full-upgrade -y
fi
# Update system on Red Hat-based systems
if [ -f "/etc/redhat-release" ]; then
yum -y update
fi
# Update system on Alpine Linux
if [ -f "/etc/alpine-release" ]; then
apk update && apk upgrade
fi
;;
3)
clear
clean_debian() {
apt autoremove --purge -y
apt clean -y
apt autoclean -y
apt remove --purge $(dpkg -l | awk '/^rc/ {print $2}') -y
journalctl --rotate
journalctl --vacuum-time=1s
journalctl --vacuum-size=50M
apt remove --purge $(dpkg -l | awk '/^ii linux-(image|headers)-[^ ]+/{print $2}' | grep -v $(uname -r | sed 's/-.*//') | xargs) -y
}
clean_redhat() {
yum autoremove -y
yum clean all
journalctl --rotate
journalctl --vacuum-time=1s
journalctl --vacuum-size=50M
yum remove $(rpm -q kernel | grep -v $(uname -r)) -y
}
clean_alpine() {
apk del --purge $(apk info --installed | awk '{print $1}' | grep -v $(apk info --available | awk '{print $1}'))
apk autoremove
apk cache clean
rm -rf /var/log/*
rm -rf /var/cache/apk/*
}
# Main script
if [ -f "/etc/debian_version" ]; then
# Debian-based systems
clean_debian
elif [ -f "/etc/redhat-release" ]; then
# Red Hat-based systems
clean_redhat
elif [ -f "/etc/alpine-release" ]; then
# Alpine Linux
clean_alpine
fi
;;
4)
while true; do
clear
echo "▶ 安装常用工具"
echo "------------------------"
echo "1. curl 下载工具"
echo "2. wget 下载工具"
echo "3. sudo 超级管理权限工具"
echo "4. socat 通信连接工具 （申请域名证书必备）"
echo "5. htop 系统监控工具"
echo "6. iftop 网络流量监控工具"
echo "7. unzip ZIP压缩解压工具"
echo "8. tar GZ压缩解压工具"
echo "9. tmux 多路后台运行工具"
echo "10. ffmpeg 视频编码直播推流工具"
echo "11. btop 现代化监控工具"
echo "12. ranger 文件管理工具"
echo "13. gdu 磁盘占用查看工具"
echo "14. fzf 全局搜索工具"
echo "------------------------"
echo "21. cmatrix 黑客帝国屏保"
echo -e "22. sl 跑火车屏保 \033[33mNEW\033[0m"
echo "------------------------"
echo -e "26. 俄罗斯方块小游戏 \033[33mNEW\033[0m"
echo -e "27. 贪吃蛇小游戏 \033[33mNEW\033[0m"
echo -e "28. 太空入侵者小游戏 \033[33mNEW\033[0m"
echo "------------------------"
echo "31. 全部安装"
echo "32. 全部卸载"
echo "------------------------"
echo "41. 安装指定工具"
echo "42. 卸载指定工具"
echo "------------------------"
echo "0. 返回主菜单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
install curl
clear
echo "工具已安装，使用方法如下："
curl --help
;;
2)
clear
install wget
clear
echo "工具已安装，使用方法如下："
wget --help
;;
3)
clear
install sudo
clear
echo "工具已安装，使用方法如下："
sudo --help
;;
4)
clear
install socat
clear
echo "工具已安装，使用方法如下："
socat -h
;;
5)
clear
install htop
clear
htop
;;
6)
clear
install iftop
clear
iftop
;;
7)
clear
install unzip
clear
echo "工具已安装，使用方法如下："
unzip
;;
8)
clear
install tar
clear
echo "工具已安装，使用方法如下："
tar --help
;;
9)
clear
install tmux
clear
echo "工具已安装，使用方法如下："
tmux --help
;;
10)
clear
install ffmpeg
clear
echo "工具已安装，使用方法如下："
ffmpeg --help
;;
11)
clear
install btop
clear
btop
;;
12)
clear
install ranger
cd /
clear
ranger
cd ~
;;
13)
clear
install gdu
cd /
clear
gdu
cd ~
;;
14)
clear
install fzf
cd /
clear
fzf
cd ~
;;
21)
clear
install cmatrix
clear
cmatrix
;;
22)
clear
install sl
clear
/usr/games/sl
;;
26)
clear
install bastet
clear
/usr/games/bastet
;;
27)
clear
install nsnake
clear
/usr/games/nsnake
;;
28)
clear
install ninvaders
clear
/usr/games/ninvaders
;;
31)
clear
install curl wget sudo socat htop iftop unzip tar tmux ffmpeg btop ranger gdu fzf cmatrix sl bastet nsnake ninvaders
;;
32)
clear
remove htop iftop unzip tmux ffmpeg btop ranger gdu fzf cmatrix sl bastet nsnake ninvaders
;;
41)
clear
read -p "请输入安装的工具名（wget curl sudo htop）: " installname
install $installname
;;
42)
clear
read -p "请输入卸载的工具名（htop ufw tmux cmatrix）: " removename
remove $removename
;;
0)
kejilion
;;
*)
echo "无效的输入!"
;;
esac
break_end
done
;;
5)
clear
if [ -f "/etc/alpine-release" ]; then
while true; do
clear
congestion_algorithm=$(sysctl -n net.ipv4.tcp_congestion_control)
queue_algorithm=$(sysctl -n net.core.default_qdisc)
echo "当前TCP阻塞算法: $congestion_algorithm $queue_algorithm"
echo ""
echo "BBR管理"
echo "------------------------"
echo "1. 开启BBRv3 2. 关闭BBRv3（会重启）"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
cat > /etc/sysctl.conf << EOF
net.core.default_qdisc=fq_pie
net.ipv4.tcp_congestion_control=bbr
EOF
sysctl -p
;;
2)
sed -i '/net.core.default_qdisc=fq_pie/d' /etc/sysctl.conf
sed -i '/net.ipv4.tcp_congestion_control=bbr/d' /etc/sysctl.conf
sysctl -p
reboot
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
done
else
install wget
wget --no-check-certificate -O tcpx.sh https://raw.gitmirror.com/ylx2016/Linux-NetSpeed/master/tcpx.sh
chmod +x tcpx.sh
./tcpx.sh
fi
;;
6)
while true; do
clear
echo "▶ Docker管理器"
echo "------------------------"
echo "1. 安装更新Docker环境"
echo "------------------------"
echo "2. 查看Dcoker全局状态"
echo "------------------------"
echo "3. Dcoker容器管理 ▶"
echo "4. Dcoker镜像管理 ▶"
echo "5. Dcoker网络管理 ▶"
echo "6. Dcoker卷管理 ▶"
echo "------------------------"
echo "7. 清理无用的docker容器和镜像网络数据卷"
echo "------------------------"
echo "8. 卸载Dcoker环境"
echo "------------------------"
echo "0. 返回主菜单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
install_add_docker
;;
2)
clear
echo "Dcoker版本"
docker --version
docker-compose --version
echo ""
echo "Dcoker镜像列表"
docker image ls
echo ""
echo "Dcoker容器列表"
docker ps -a
echo ""
echo "Dcoker卷列表"
docker volume ls
echo ""
echo "Dcoker网络列表"
docker network ls
echo ""
;;
3)
while true; do
clear
echo "Docker容器列表"
docker ps -a
echo ""
echo "容器操作"
echo "------------------------"
echo "1. 创建新的容器"
echo "------------------------"
echo "2. 启动指定容器 6. 启动所有容器"
echo "3. 停止指定容器 7. 暂停所有容器"
echo "4. 删除指定容器 8. 删除所有容器"
echo "5. 重启指定容器 9. 重启所有容器"
echo "------------------------"
echo "11. 进入指定容器 12. 查看容器日志 13. 查看容器网络"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
read -p "请输入创建命令: " dockername
$dockername
;;
2)
read -p "请输入容器名: " dockername
docker start $dockername
;;
3)
read -p "请输入容器名: " dockername
docker stop $dockername
;;
4)
read -p "请输入容器名: " dockername
docker rm -f $dockername
;;
5)
read -p "请输入容器名: " dockername
docker restart $dockername
;;
6)
docker start $(docker ps -a -q)
;;
7)
docker stop $(docker ps -q)
;;
8)
read -p "确定删除所有容器吗？(Y/N): " choice
case "$choice" in
[Yy])
docker rm -f $(docker ps -a -q)
;;
[Nn])
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
;;
9)
docker restart $(docker ps -q)
;;
11)
read -p "请输入容器名: " dockername
docker exec -it $dockername /bin/bash
break_end
;;
12)
read -p "请输入容器名: " dockername
docker logs $dockername
break_end
;;
13)
echo ""
container_ids=$(docker ps -q)
echo "------------------------------------------------------------"
printf "%-25s %-25s %-25s\n" "容器名称" "网络名称" "IP地址"
for container_id in $container_ids; do
container_info=$(docker inspect --format '{{ .Name }}{{ range $network, $config := .NetworkSettings.Networks }} {{ $network }} {{ $config.IPAddress }}{{ end }}' "$container_id")
container_name=$(echo "$container_info" | awk '{print $1}')
network_info=$(echo "$container_info" | cut -d' ' -f2-)
while IFS= read -r line; do
network_name=$(echo "$line" | awk '{print $1}')
ip_address=$(echo "$line" | awk '{print $2}')
printf "%-20s %-20s %-15s\n" "$container_name" "$network_name" "$ip_address"
done <<< "$network_info"
done
break_end
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
done
;;
4)
while true; do
clear
echo "Docker镜像列表"
docker image ls
echo ""
echo "镜像操作"
echo "------------------------"
echo "1. 获取指定镜像 3. 删除指定镜像"
echo "2. 更新指定镜像 4. 删除所有镜像"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
read -p "请输入镜像名: " dockername
docker pull $dockername
;;
2)
read -p "请输入镜像名: " dockername
docker pull $dockername
;;
3)
read -p "请输入镜像名: " dockername
docker rmi -f $dockername
;;
4)
read -p "确定删除所有镜像吗？(Y/N): " choice
case "$choice" in
[Yy])
docker rmi -f $(docker images -q)
;;
[Nn])
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
done
;;
5)
while true; do
clear
echo "Docker网络列表"
echo "------------------------------------------------------------"
docker network ls
echo ""
echo "------------------------------------------------------------"
container_ids=$(docker ps -q)
printf "%-25s %-25s %-25s\n" "容器名称" "网络名称" "IP地址"
for container_id in $container_ids; do
container_info=$(docker inspect --format '{{ .Name }}{{ range $network, $config := .NetworkSettings.Networks }} {{ $network }} {{ $config.IPAddress }}{{ end }}' "$container_id")
container_name=$(echo "$container_info" | awk '{print $1}')
network_info=$(echo "$container_info" | cut -d' ' -f2-)
while IFS= read -r line; do
network_name=$(echo "$line" | awk '{print $1}')
ip_address=$(echo "$line" | awk '{print $2}')
printf "%-20s %-20s %-15s\n" "$container_name" "$network_name" "$ip_address"
done <<< "$network_info"
done
echo ""
echo "网络操作"
echo "------------------------"
echo "1. 创建网络"
echo "2. 加入网络"
echo "3. 退出网络"
echo "4. 删除网络"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
read -p "设置新网络名: " dockernetwork
docker network create $dockernetwork
;;
2)
read -p "加入网络名: " dockernetwork
read -p "那些容器加入该网络: " dockername
docker network connect $dockernetwork $dockername
echo ""
;;
3)
read -p "退出网络名: " dockernetwork
read -p "那些容器退出该网络: " dockername
docker network disconnect $dockernetwork $dockername
echo ""
;;
4)
read -p "请输入要删除的网络名: " dockernetwork
docker network rm $dockernetwork
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
done
;;
6)
while true; do
clear
echo "Docker卷列表"
docker volume ls
echo ""
echo "卷操作"
echo "------------------------"
echo "1. 创建新卷"
echo "2. 删除卷"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
read -p "设置新卷名: " dockerjuan
docker volume create $dockerjuan
;;
2)
read -p "输入删除卷名: " dockerjuan
docker volume rm $dockerjuan
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
done
;;
7)
clear
read -p "确定清理无用的镜像容器网络吗？(Y/N): " choice
case "$choice" in
[Yy])
docker system prune -af --volumes
;;
[Nn])
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
;;
8)
clear
read -p "确定卸载docker环境吗？(Y/N): " choice
case "$choice" in
[Yy])
docker rm $(docker ps -a -q) && docker rmi $(docker images -q) && docker network prune
remove docker docker-ce docker-compose > /dev/null 2>&1
;;
[Nn])
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
;;
0)
kejilion
;;
*)
echo "无效的输入!"
;;
esac
break_end
done
;;
7)
clear
install wget
wget -N https://gitlab.com/fscarmen/warp/-/raw/main/menu.sh && bash menu.sh [option] [lisence/url/token]
;;
8)
while true; do
clear
echo "▶ 测试脚本合集"
echo "------------------------"
echo "1. ChatGPT解锁状态检测"
echo "2. Region流媒体解锁测试"
echo "3. yeahwu流媒体解锁检测"
echo "4. besttrace三网回程延迟路由测试"
echo "5. mtr_trace三网回程线路测试"
echo "6. Superspeed三网测速"
echo "7. yabs性能带宽测试"
echo "8. bench性能测试"
echo "------------------------"
echo -e "9. spiritysdx融合怪测评 \033[33mNEW\033[0m"
echo "------------------------"
echo "0. 返回主菜单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
bash <(curl -Ls https://cdn.jsdelivr.net/gh/missuo/OpenAI-Checker/openai.sh)
;;
2)
clear
bash <(curl -L -s check.unlock.media)
;;
3)
clear
install wget
wget -qO- https://hub.gitmirror.com/https://github.com/yeahwu/check/raw/main/check.sh | bash
;;
4)
clear
install wget
wget -qO- git.io/besttrace | bash
;;
5)
clear
curl https://raw.gitmirror.com/zhucaidan/mtr_trace/main/mtr_trace.sh | bash
;;
6)
clear
bash <(curl -Lso- https://git.io/superspeed_uxh)
;;
7)
clear
curl -sL yabs.sh | bash -s -- -i -5
;;
8)
clear
curl -Lso- bench.sh | bash
;;
9)
clear
curl -L https://gitlab.com/spiritysdx/za/-/raw/main/ecs.sh -o ecs.sh && chmod +x ecs.sh && bash ecs.sh
;;
0)
kejilion
;;
*)
echo "无效的输入!"
;;
esac
break_end
done
;;
9)
while true; do
clear
echo "▶ 甲骨文云脚本合集"
echo "------------------------"
echo "1. 安装闲置机器活跃脚本"
echo "2. 卸载闲置机器活跃脚本"
echo "------------------------"
echo "3. DD重装系统脚本"
echo "4. R探长开机脚本"
echo "------------------------"
echo "5. 开启ROOT密码登录模式"
echo "------------------------"
echo "0. 返回主菜单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
echo "活跃脚本: CPU占用10-20% 内存占用15% "
read -p "确定安装吗？(Y/N): " choice
case "$choice" in
[Yy])
install_docker
docker run -itd --name=lookbusy --restart=always \
-e TZ=Asia/Shanghai \
-e CPU_UTIL=10-20 \
-e CPU_CORE=1 \
-e MEM_UTIL=15 \
-e SPEEDTEST_INTERVAL=120 \
fogforest/lookbusy
;;
[Nn])
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
;;
2)
clear
docker rm -f lookbusy
docker rmi fogforest/lookbusy
;;
3)
clear
echo "请备份数据，将为你重装系统，预计花费15分钟。"
read -p "确定继续吗？(Y/N): " choice
case "$choice" in
[Yy])
while true; do
read -p "请选择要重装的系统: 1. Debian12 | 2. Ubuntu20.04 : " sys_choice
case "$sys_choice" in
1)
xitong="-d 12"
break # 结束循环
;;
2)
xitong="-u 20.04"
break # 结束循环
;;
*)
echo "无效的选择，请重新输入。"
;;
esac
done
read -p "请输入你重装后的密码: " vpspasswd
install wget
bash <(wget --no-check-certificate -qO- 'https://raw.gitmirror.com/MoeClub/Note/master/InstallNET.sh') $xitong -v 64 -p $vpspasswd -port 22
;;
[Nn])
echo "已取消"
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
;;
4)
clear
echo "该功能处于开发阶段，敬请期待！"
;;
5)
clear
echo "设置你的ROOT密码"
passwd
sed -i 's/^#\?PermitRootLogin.*/PermitRootLogin yes/g' /etc/ssh/sshd_config;
sed -i 's/^#\?PasswordAuthentication.*/PasswordAuthentication yes/g' /etc/ssh/sshd_config;
service sshd restart
echo "ROOT登录设置完毕！"
read -p "需要重启服务器吗？(Y/N): " choice
case "$choice" in
[Yy])
reboot
;;
[Nn])
echo "已取消"
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
;;
0)
kejilion
;;
*)
echo "无效的输入!"
;;
esac
break_end
done
;;
10)
while true; do
clear
echo -e "\033[33m▶ LDNMP建站\033[0m"
echo "------------------------"
echo "1. 安装LDNMP环境"
echo "------------------------"
echo "2. 安装WordPress"
echo "3. 安装Discuz论坛"
echo "4. 安装可道云桌面"
echo "5. 安装苹果CMS网站"
echo "6. 安装独角数发卡网"
echo "8. 安装flarum论坛网站"
echo "9. 安装Bitwarden密码管理平台"
echo "10. 安装Halo博客网站"
echo "11. 安装typecho轻量博客网站"
echo "------------------------"
echo -e "21. 仅安装nginx \033[33mNEW\033[0m"
echo "22. 站点重定向"
echo "23. 站点反向代理"
echo -e "24. 自定义静态站点 \033[36mBeta\033[0m"
echo "------------------------"
echo "31. 站点数据管理"
echo "32. 备份全站数据"
echo "33. 定时远程备份"
echo "34. 还原全站数据"
echo "------------------------"
echo "35. 站点防御程序"
echo "------------------------"
echo "36. 优化LDNMP环境"
echo "37. 更新LDNMP环境"
echo "38. 卸载LDNMP环境"
echo "------------------------"
echo "0. 返回主菜单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
check_port
install_dependency
install_docker
install_certbot
# 创建必要的目录和文件
cd /home && mkdir -p web/html web/mysql web/certs web/conf.d web/redis web/log/nginx && touch web/docker-compose.yml
wget -O /home/web/nginx.conf https://raw.gitmirror.com/kejilion/nginx/main/nginx10.conf
wget -O /home/web/conf.d/default.conf https://raw.gitmirror.com/kejilion/nginx/main/default10.conf
default_server_ssl
# 下载 docker-compose.yml 文件并进行替换
wget -O /home/web/docker-compose.yml https://raw.gitmirror.com/kejilion/docker/main/LNMP-docker-compose-10.yml
dbrootpasswd=$(openssl rand -base64 16) && dbuse=$(openssl rand -hex 4) && dbusepasswd=$(openssl rand -base64 8)
# 在 docker-compose.yml 文件中进行替换
sed -i "s/webroot/$dbrootpasswd/g" /home/web/docker-compose.yml
sed -i "s/kejilionYYDS/$dbusepasswd/g" /home/web/docker-compose.yml
sed -i "s/kejilion/$dbuse/g" /home/web/docker-compose.yml
install_ldnmp
;;
2)
clear
# wordpress
add_yuming
install_ssltls
add_db
wget -O /home/web/conf.d/$yuming.conf https://raw.gitmirror.com/kejilion/nginx/main/wordpress.com.conf
sed -i "s/yuming.com/$yuming/g" /home/web/conf.d/$yuming.conf
cd /home/web/html
mkdir $yuming
cd $yuming
wget -O latest.zip https://cn.wordpress.org/latest-zh_CN.zip
unzip latest.zip
rm latest.zip
echo "define('FS_METHOD', 'direct'); define('WP_REDIS_HOST', 'redis'); define('WP_REDIS_PORT', '6379');" >> /home/web/html/$yuming/wordpress/wp-config-sample.php
restart_ldnmp
clear
echo "您的WordPress搭建好了！"
echo "https://$yuming"
echo "------------------------"
echo "WP安装信息如下: "
echo "数据库名: $dbname"
echo "用户名: $dbuse"
echo "密码: $dbusepasswd"
echo "数据库地址: mysql"
echo "表前缀: wp_"
nginx_status
;;
3)
clear
# Discuz论坛
add_yuming
install_ssltls
add_db
wget -O /home/web/conf.d/$yuming.conf https://raw.gitmirror.com/kejilion/nginx/main/discuz.com.conf
sed -i "s/yuming.com/$yuming/g" /home/web/conf.d/$yuming.conf
cd /home/web/html
mkdir $yuming
cd $yuming
wget https://hub.gitmirror.com/https://github.com/kejilion/Website_source_code/raw/main/Discuz_X3.5_SC_UTF8_20230520.zip
unzip -o Discuz_X3.5_SC_UTF8_20230520.zip
rm Discuz_X3.5_SC_UTF8_20230520.zip
restart_ldnmp
clear
echo "您的Discuz论坛搭建好了！"
echo "https://$yuming"
echo "------------------------"
echo "安装信息如下: "
echo "数据库地址: mysql"
echo "数据库名: $dbname"
echo "用户名: $dbuse"
echo "密码: $dbusepasswd"
echo "表前缀: discuz_"
nginx_status
;;
4)
clear
# 可道云桌面
add_yuming
install_ssltls
add_db
wget -O /home/web/conf.d/$yuming.conf https://raw.gitmirror.com/kejilion/nginx/main/kdy.com.conf
sed -i "s/yuming.com/$yuming/g" /home/web/conf.d/$yuming.conf
cd /home/web/html
mkdir $yuming
cd $yuming
wget https://hub.gitmirror.com/https://github.com/kalcaddle/kodbox/archive/refs/tags/1.42.04.zip
unzip -o 1.42.04.zip
rm 1.42.04.zip
restart_ldnmp
clear
echo "您的可道云桌面搭建好了！"
echo "https://$yuming"
echo "------------------------"
echo "安装信息如下: "
echo "数据库地址: mysql"
echo "用户名: $dbuse"
echo "密码: $dbusepasswd"
echo "数据库名: $dbname"
echo "redis主机: redis"
nginx_status
;;
5)
clear
# 苹果CMS
add_yuming
install_ssltls
add_db
wget -O /home/web/conf.d/$yuming.conf https://raw.gitmirror.com/kejilion/nginx/main/maccms.com.conf
sed -i "s/yuming.com/$yuming/g" /home/web/conf.d/$yuming.conf
cd /home/web/html
mkdir $yuming
cd $yuming
wget https://hub.gitmirror.com/https://github.com/magicblack/maccms_down/raw/master/maccms10.zip && unzip maccms10.zip && rm maccms10.zip
cd /home/web/html/$yuming/template/ && wget https://hub.gitmirror.com/https://github.com/kejilion/Website_source_code/raw/main/DYXS2.zip && unzip DYXS2.zip && rm /home/web/html/$yuming/template/DYXS2.zip
cp /home/web/html/$yuming/template/DYXS2/asset/admin/Dyxs2.php /home/web/html/$yuming/application/admin/controller
cp /home/web/html/$yuming/template/DYXS2/asset/admin/dycms.html /home/web/html/$yuming/application/admin/view/system
mv /home/web/html/$yuming/admin.php /home/web/html/$yuming/vip.php && wget -O /home/web/html/$yuming/application/extra/maccms.php https://raw.gitmirror.com/kejilion/Website_source_code/main/maccms.php
restart_ldnmp
clear
echo "您的苹果CMS搭建好了！"
echo "https://$yuming"
echo "------------------------"
echo "安装信息如下: "
echo "数据库地址: mysql"
echo "数据库端口: 3306"
echo "数据库名: $dbname"
echo "用户名: $dbuse"
echo "密码: $dbusepasswd"
echo "数据库前缀: mac_"
echo "------------------------"
echo "安装成功后登录后台地址"
echo "https://$yuming/vip.php"
nginx_status
;;
6)
clear
# 独脚数卡
add_yuming
install_ssltls
add_db
wget -O /home/web/conf.d/$yuming.conf https://raw.gitmirror.com/kejilion/nginx/main/dujiaoka.com.conf
sed -i "s/yuming.com/$yuming/g" /home/web/conf.d/$yuming.conf
cd /home/web/html
mkdir $yuming
cd $yuming
wget https://hub.gitmirror.com/https://github.com/assimon/dujiaoka/releases/download/2.0.6/2.0.6-antibody.tar.gz && tar -zxvf 2.0.6-antibody.tar.gz && rm 2.0.6-antibody.tar.gz
restart_ldnmp
clear
echo "您的独角数卡网站搭建好了！"
echo "https://$yuming"
echo "------------------------"
echo "安装信息如下: "
echo "数据库地址: mysql"
echo "数据库端口: 3306"
echo "数据库名: $dbname"
echo "用户名: $dbuse"
echo "密码: $dbusepasswd"
echo ""
echo "redis地址: redis"
echo "redis密码: 默认不填写"
echo "redis端口: 6379"
echo ""
echo "网站url: https://$yuming"
echo "后台登录路径: /admin"
echo "------------------------"
echo "用户名: admin"
echo "密码: admin"
echo "------------------------"
echo "登录时右上角如果出现红色error0请使用如下命令: "
echo "我也很气愤独角数卡为啥这么麻烦，会有这样的问题！"
echo "sed -i 's/ADMIN_HTTPS=false/ADMIN_HTTPS=true/g' /home/web/html/$yuming/dujiaoka/.env"
nginx_status
;;
8)
clear
# flarum论坛
add_yuming
install_ssltls
add_db
wget -O /home/web/conf.d/$yuming.conf https://raw.gitmirror.com/kejilion/nginx/main/flarum.com.conf
sed -i "s/yuming.com/$yuming/g" /home/web/conf.d/$yuming.conf
cd /home/web/html
mkdir $yuming
cd $yuming
docker exec php sh -c "php -r \"copy('https://getcomposer.org/installer', 'composer-setup.php');\""
docker exec php sh -c "php composer-setup.php"
docker exec php sh -c "php -r \"unlink('composer-setup.php');\""
docker exec php sh -c "mv composer.phar /usr/local/bin/composer"
docker exec php composer create-project flarum/flarum /var/www/html/$yuming
docker exec php sh -c "cd /var/www/html/$yuming && composer require flarum-lang/chinese-simplified"
docker exec php sh -c "cd /var/www/html/$yuming && composer require fof/polls"
restart_ldnmp
clear
echo "您的flarum论坛网站搭建好了！"
echo "https://$yuming"
echo "------------------------"
echo "安装信息如下: "
echo "数据库地址: mysql"
echo "数据库名: $dbname"
echo "用户名: $dbuse"
echo "密码: $dbusepasswd"
echo "表前缀: flarum_"
echo "管理员信息自行设置"
nginx_status
;;
9)
clear
# Bitwarden
add_yuming
install_ssltls
docker run -d \
--name bitwarden \
--restart always \
-p 3280:80 \
-v /home/web/html/$yuming/bitwarden/data:/data \
vaultwarden/server
duankou=3280
reverse_proxy
clear
echo "您的Bitwarden网站搭建好了！"
echo "https://$yuming"
nginx_status
;;
10)
clear
# halo
add_yuming
install_ssltls
docker run -d --name halo --restart always --network web_default -p 8010:8090 -v /home/web/html/$yuming/.halo2:/root/.halo2 halohub/halo:2.11
duankou=8010
reverse_proxy
clear
echo "您的Halo网站搭建好了！"
echo "https://$yuming"
nginx_status
;;
11)
clear
# typecho
add_yuming
install_ssltls
add_db
wget -O /home/web/conf.d/$yuming.conf https://raw.gitmirror.com/kejilion/nginx/main/typecho.com.conf
sed -i "s/yuming.com/$yuming/g" /home/web/conf.d/$yuming.conf
cd /home/web/html
mkdir $yuming
cd $yuming
wget -O latest.zip https://hub.gitmirror.com/https://github.com/typecho/typecho/releases/latest/download/typecho.zip
unzip latest.zip
rm latest.zip
restart_ldnmp
clear
echo "您的typecho搭建好了！"
echo "https://$yuming"
echo "------------------------"
echo "安装信息如下: "
echo "数据库前缀: typecho_"
echo "数据库地址: mysql"
echo "用户名: $dbuse"
echo "密码: $dbusepasswd"
echo "数据库名: $dbname"
nginx_status
;;
21)
check_port
install_dependency
install_docker
install_certbot
cd /home && mkdir -p web/html web/mysql web/certs web/conf.d web/redis web/log/nginx && touch web/docker-compose.yml
wget -O /home/web/nginx.conf https://raw.gitmirror.com/kejilion/nginx/main/nginx10.conf
wget -O /home/web/conf.d/default.conf https://raw.gitmirror.com/kejilion/nginx/main/default10.conf
default_server_ssl
docker rm -f nginx >/dev/null 2>&1
docker rmi nginx nginx:alpine >/dev/null 2>&1
docker run -d --name nginx --restart always -p 80:80 -p 443:443 -p 443:443/udp -v /home/web/nginx.conf:/etc/nginx/nginx.conf -v /home/web/conf.d:/etc/nginx/conf.d -v /home/web/certs:/etc/nginx/certs -v /home/web/html:/var/www/html -v /home/web/log/nginx:/var/log/nginx nginx:alpine
clear
nginx_version=$(docker exec nginx nginx -v 2>&1)
nginx_version=$(echo "$nginx_version" | grep -oP "nginx/\K[0-9]+\.[0-9]+\.[0-9]+")
echo "nginx已安装完成"
echo "当前版本: v$nginx_version"
echo ""
;;
22)
clear
ip_address
add_yuming
read -p "请输入跳转域名: " reverseproxy
install_ssltls
wget -O /home/web/conf.d/$yuming.conf https://raw.gitmirror.com/kejilion/nginx/main/rewrite.conf
sed -i "s/yuming.com/$yuming/g" /home/web/conf.d/$yuming.conf
sed -i "s/baidu.com/$reverseproxy/g" /home/web/conf.d/$yuming.conf
docker restart nginx
clear
echo "您的重定向网站做好了！"
echo "https://$yuming"
nginx_status
;;
23)
clear
ip_address
add_yuming
read -p "请输入你的反代IP: " reverseproxy
read -p "请输入你的反代端口: " port
install_ssltls
wget -O /home/web/conf.d/$yuming.conf https://raw.gitmirror.com/kejilion/nginx/main/reverse-proxy.conf
sed -i "s/yuming.com/$yuming/g" /home/web/conf.d/$yuming.conf
sed -i "s/0.0.0.0/$reverseproxy/g" /home/web/conf.d/$yuming.conf
sed -i "s/0000/$port/g" /home/web/conf.d/$yuming.conf
docker restart nginx
clear
echo "您的反向代理网站做好了！"
echo "https://$yuming"
nginx_status
;;
24)
clear
# 静态界面
add_yuming
install_ssltls
wget -O /home/web/conf.d/$yuming.conf https://raw.gitmirror.com/kejilion/nginx/main/html.conf
sed -i "s/yuming.com/$yuming/g" /home/web/conf.d/$yuming.conf
cd /home/web/html
mkdir $yuming
cd $yuming
install lrzsz
clear
echo -e "目前只允许上传\033[33mindex.html\033[0m文件，请提前准备好，按任意键继续..."
read -n 1 -s -r -p ""
rz -y
docker exec nginx chmod -R 777 /var/www/html
docker restart nginx
clear
echo "您的静态网站搭建好了！"
echo "https://$yuming"
nginx_status
;;
31)
while true; do
clear
echo "LDNMP环境"
echo "------------------------"
# 获取nginx版本
nginx_version=$(docker exec nginx nginx -v 2>&1)
nginx_version=$(echo "$nginx_version" | grep -oP "nginx/\K[0-9]+\.[0-9]+\.[0-9]+")
echo -n "nginx : v$nginx_version"
# 获取mysql版本
dbrootpasswd=$(grep -oP 'MYSQL_ROOT_PASSWORD:\s*\K.*' /home/web/docker-compose.yml | tr -d '[:space:]')
mysql_version=$(docker exec mysql mysql -u root -p"$dbrootpasswd" -e "SELECT VERSION();" 2>/dev/null | tail -n 1)
echo -n " mysql : v$mysql_version"
# 获取php版本
php_version=$(docker exec php php -v 2>/dev/null | grep -oP "PHP \K[0-9]+\.[0-9]+\.[0-9]+")
echo -n " php : v$php_version"
# 获取redis版本
redis_version=$(docker exec redis redis-server -v 2>&1 | grep -oP "v=+\K[0-9]+\.[0-9]+")
echo " redis : v$redis_version"
echo "------------------------"
echo ""
# ls -t /home/web/conf.d | sed 's/\.[^.]*$//'
echo "站点信息 证书到期时间"
echo "------------------------"
for cert_file in /home/web/certs/*_cert.pem; do
domain=$(basename "$cert_file" | sed 's/_cert.pem//')
if [ -n "$domain" ]; then
expire_date=$(openssl x509 -noout -enddate -in "$cert_file" | awk -F'=' '{print $2}')
formatted_date=$(date -d "$expire_date" '+%Y-%m-%d')
printf "%-30s%s\n" "$domain" "$formatted_date"
fi
done
echo "------------------------"
echo ""
echo "数据库信息"
echo "------------------------"
dbrootpasswd=$(grep -oP 'MYSQL_ROOT_PASSWORD:\s*\K.*' /home/web/docker-compose.yml | tr -d '[:space:]')
docker exec mysql mysql -u root -p"$dbrootpasswd" -e "SHOW DATABASES;" 2> /dev/null | grep -Ev "Database|information_schema|mysql|performance_schema|sys"
echo "------------------------"
echo ""
echo "站点目录"
echo "------------------------"
echo -e "数据 \e[37m/home/web/html\e[0m 证书 \e[37m/home/web/certs\e[0m 配置 \e[37m/home/web/conf.d\e[0m"
echo "------------------------"
echo ""
echo "操作"
echo "------------------------"
echo "1. 申请/更新域名证书 2. 更换站点域名"
echo -e "3. 清理站点缓存 4. 查看站点分析报告 \033[33mNEW\033[0m"
echo "------------------------"
echo "7. 删除指定站点 8. 删除指定数据库"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
read -p "请输入你的域名: " yuming
install_ssltls
;;
2)
read -p "请输入旧域名: " oddyuming
read -p "请输入新域名: " yuming
install_ssltls
mv /home/web/conf.d/$oddyuming.conf /home/web/conf.d/$yuming.conf
sed -i "s/$oddyuming/$yuming/g" /home/web/conf.d/$yuming.conf
mv /home/web/html/$oddyuming /home/web/html/$yuming
rm /home/web/certs/${oddyuming}_key.pem
rm /home/web/certs/${oddyuming}_cert.pem
docker restart nginx
;;
3)
docker exec -it nginx rm -rf /var/cache/nginx
docker restart nginx
;;
4)
install goaccess
goaccess --log-format=COMBINED /home/web/log/nginx/access.log
;;
7)
read -p "请输入你的域名: " yuming
rm -r /home/web/html/$yuming
rm /home/web/conf.d/$yuming.conf
rm /home/web/certs/${yuming}_key.pem
rm /home/web/certs/${yuming}_cert.pem
docker restart nginx
;;
8)
read -p "请输入数据库名: " shujuku
dbrootpasswd=$(grep -oP 'MYSQL_ROOT_PASSWORD:\s*\K.*' /home/web/docker-compose.yml | tr -d '[:space:]')
docker exec mysql mysql -u root -p"$dbrootpasswd" -e "DROP DATABASE $shujuku;" 2> /dev/null
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
done
;;
32)
clear
cd /home/ && tar czvf web_$(date +"%Y%m%d%H%M%S").tar.gz web
while true; do
clear
read -p "要传送文件到远程服务器吗？(Y/N): " choice
case "$choice" in
[Yy])
read -p "请输入远端服务器IP: " remote_ip
if [ -z "$remote_ip" ]; then
echo "错误: 请输入远端服务器IP。"
continue
fi
latest_tar=$(ls -t /home/*.tar.gz | head -1)
if [ -n "$latest_tar" ]; then
ssh-keygen -f "/root/.ssh/known_hosts" -R "$remote_ip"
sleep 2 # 添加等待时间
scp -o StrictHostKeyChecking=no "$latest_tar" "root@$remote_ip:/home/"
echo "文件已传送至远程服务器home目录。"
else
echo "未找到要传送的文件。"
fi
break
;;
[Nn])
break
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
done
;;
33)
clear
read -p "输入远程服务器IP: " useip
read -p "输入远程服务器密码: " usepasswd
cd ~
wget -O ${useip}_beifen.sh https://raw.gitmirror.com/kejilion/sh/main/beifen.sh > /dev/null 2>&1
chmod +x ${useip}_beifen.sh
sed -i "s/0.0.0.0/$useip/g" ${useip}_beifen.sh
sed -i "s/123456/$usepasswd/g" ${useip}_beifen.sh
echo "------------------------"
echo "1. 每周备份 2. 每天备份"
read -p "请输入你的选择: " dingshi
case $dingshi in
1)
read -p "选择每周备份的星期几 (0-6，0代表星期日): " weekday
(crontab -l ; echo "0 0 * * $weekday ./${useip}_beifen.sh") | crontab - > /dev/null 2>&1
;;
2)
read -p "选择每天备份的时间（小时，0-23）: " hour
(crontab -l ; echo "0 $hour * * * ./${useip}_beifen.sh") | crontab - > /dev/null 2>&1
;;
*)
break # 跳出
;;
esac
install sshpass
;;
34)
clear
cd /home/ && ls -t /home/*.tar.gz | head -1 | xargs -I {} tar -xzf {}
check_port
install_dependency
install_docker
install_certbot
install_ldnmp
;;
35)
if [ -x "$(command -v fail2ban-client)" ] && [ -d "/etc/fail2ban" ]; then
while true; do
clear
echo "服务器防御程序已启动"
echo "------------------------"
echo "1. 开启SSH防暴力破解 2. 关闭SSH防暴力破解"
echo "3. 开启网站保护 4. 关闭网站保护"
echo "------------------------"
echo "5. 查看SSH拦截记录 6. 查看网站拦截记录"
echo "7. 查看防御规则列表 8. 查看日志实时监控"
echo "------------------------"
echo "11. 配置拦截参数"
echo "------------------------"
echo "21. cloudflare模式"
echo "------------------------"
echo "9. 卸载防御程序"
echo "------------------------"
echo "0. 退出"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
sed -i 's/false/true/g' /etc/fail2ban/jail.d/sshd.local
systemctl restart fail2ban
service fail2ban restart
sleep 1
fail2ban-client status
;;
2)
sed -i 's/true/false/g' /etc/fail2ban/jail.d/sshd.local
systemctl restart fail2ban
service fail2ban restart
sleep 1
fail2ban-client status
;;
3)
sed -i 's/false/true/g' /etc/fail2ban/jail.d/nginx.local
systemctl restart fail2ban
service fail2ban restart
sleep 1
fail2ban-client status
;;
4)
sed -i 's/true/false/g' /etc/fail2ban/jail.d/nginx.local
systemctl restart fail2ban
service fail2ban restart
sleep 1
fail2ban-client status
;;
5)
echo "------------------------"
fail2ban-client status sshd
echo "------------------------"
;;
6)
echo "------------------------"
fail2ban-client status fail2ban-nginx-cc
echo "------------------------"
fail2ban-client status nginx-bad-request
echo "------------------------"
fail2ban-client status nginx-botsearch
echo "------------------------"
fail2ban-client status nginx-http-auth
echo "------------------------"
fail2ban-client status nginx-limit-req
echo "------------------------"
fail2ban-client status php-url-fopen
echo "------------------------"
;;
7)
fail2ban-client status
;;
8)
tail -f /var/log/fail2ban.log
break
;;
9)
remove fail2ban
break
;;
11)
install nano
nano /etc/fail2ban/jail.d/nginx.local
systemctl restart fail2ban
service fail2ban restart
break
;;
21)
echo "到cf后台右上角我的个人资料，选择左侧API令牌，获取Global API Key"
echo "https://dash.cloudflare.com/login"
read -p "输入CF的账号: " cfuser
read -p "输入CF的Global API Key: " cftoken
wget -O /home/web/conf.d/default.conf https://raw.gitmirror.com/kejilion/nginx/main/default11.conf
cd /etc/fail2ban/jail.d/
curl -sS -O https://raw.gitmirror.com/kejilion/sh/main/nginx.local
cd /etc/fail2ban/action.d/
curl -sS -O https://raw.gitmirror.com/kejilion/sh/main/cloudflare.conf
sed -i "s/kejilion@outlook.com/$cfuser/g" /etc/fail2ban/action.d/cloudflare.conf
sed -i "s/APIKEY00000/$cftoken/g" /etc/fail2ban/action.d/cloudflare.conf
systemctl restart fail2ban
service fail2ban restart
docker restart nginx
echo "已配置cloudflare模式，可在cf后台，站点-安全性-事件中查看拦截记录"
;;
0)
break
;;
*)
echo "无效的选择，请重新输入。"
;;
esac
break_end
done
else
clear
install epel-release fail2ban
if grep -q 'Alpine' /etc/issue; then
echo "当前系统为Alpine 将采用默认配置"
else
rm -rf /etc/fail2ban/jail.d/*
cd /etc/fail2ban/jail.d/
curl -sS -O https://raw.gitmirror.com/kejilion/sh/main/sshd.local
fi
systemctl start fail2ban
service fail2ban start
systemctl enable fail2ban
rc-update add fail2ban
docker rm -f nginx
wget -O /home/web/nginx.conf https://raw.gitmirror.com/kejilion/nginx/main/nginx10.conf
wget -O /home/web/conf.d/default.conf https://raw.gitmirror.com/kejilion/nginx/main/default10.conf
default_server_ssl
docker run -d --name nginx --restart always --network web_default -p 80:80 -p 443:443 -p 443:443/udp -v /home/web/nginx.conf:/etc/nginx/nginx.conf -v /home/web/conf.d:/etc/nginx/conf.d -v /home/web/certs:/etc/nginx/certs -v /home/web/html:/var/www/html -v /home/web/log/nginx:/var/log/nginx nginx:alpine
docker exec -it nginx chmod -R 777 /var/www/html
# 获取宿主机当前时区
timedatectl set-timezone Asia/Shanghai
HOST_TIMEZONE=$(timedatectl show --property=Timezone --value)
# 调整多个容器的时区
docker exec -it nginx ln -sf "/usr/share/zoneinfo/$HOST_TIMEZONE" /etc/localtime
docker exec -it php ln -sf "/usr/share/zoneinfo/$HOST_TIMEZONE" /etc/localtime
docker exec -it php74 ln -sf "/usr/share/zoneinfo/$HOST_TIMEZONE" /etc/localtime
docker exec -it mysql ln -sf "/usr/share/zoneinfo/$HOST_TIMEZONE" /etc/localtime
docker exec -it redis ln -sf "/usr/share/zoneinfo/$HOST_TIMEZONE" /etc/localtime
rm -rf /home/web/log/nginx/*
docker restart nginx
cd /etc/fail2ban/filter.d/
curl -sS -O https://raw.gitmirror.com/kejilion/sh/main/fail2ban-nginx-cc.conf
cd /etc/fail2ban/jail.d/
curl -sS -O https://raw.gitmirror.com/kejilion/sh/main/nginx.local
sed -i "/cloudflare/d" /etc/fail2ban/jail.d/nginx.local
cd /etc/fail2ban/action.d/
curl -sS -O https://raw.gitmirror.com/kejilion/sh/main/cloudflare.conf
cd ~
systemctl restart fail2ban
service fail2ban restart
sleep 1
fail2ban-client status
echo "防御程序已开启"
fi
;;
36)
while true; do
clear
echo "优化LDNMP环境"
echo "------------------------"
echo "1. 标准模式 2. 高性能模式 (推荐2H2G以上)"
echo "------------------------"
echo "0. 退出"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
# nginx调优
sed -i 's/worker_connections.*/worker_connections 1024;/' /home/web/nginx.conf
# php调优
wget -O /home/optimized_php.ini https://raw.gitmirror.com/kejilion/sh/main/optimized_php.ini
docker cp /home/optimized_php.ini php:/usr/local/etc/php/conf.d/optimized_php.ini
docker cp /home/optimized_php.ini php74:/usr/local/etc/php/conf.d/optimized_php.ini
rm -rf /home/optimized_php.ini
# php调优
wget -O /home/www.conf https://raw.gitmirror.com/kejilion/sh/main/www-1.conf
docker cp /home/www.conf php:/usr/local/etc/php-fpm.d/www.conf
docker cp /home/www.conf php74:/usr/local/etc/php-fpm.d/www.conf
rm -rf /home/www.conf
# mysql调优
wget -O /home/custom_mysql_config.cnf https://raw.gitmirror.com/kejilion/sh/main/custom_mysql_config-1.cnf
docker cp /home/custom_mysql_config.cnf mysql:/etc/mysql/conf.d/
rm -rf /home/custom_mysql_config.cnf
docker restart nginx
docker restart php
docker restart php74
docker restart mysql
echo "LDNMP环境已设置成 标准模式"
;;
2)
# nginx调优
sed -i 's/worker_connections.*/worker_connections 10240;/' /home/web/nginx.conf
# php调优
wget -O /home/www.conf https://raw.gitmirror.com/kejilion/sh/main/www.conf
docker cp /home/www.conf php:/usr/local/etc/php-fpm.d/www.conf
docker cp /home/www.conf php74:/usr/local/etc/php-fpm.d/www.conf
rm -rf /home/www.conf
# mysql调优
wget -O /home/custom_mysql_config.cnf https://raw.gitmirror.com/kejilion/sh/main/custom_mysql_config.cnf
docker cp /home/custom_mysql_config.cnf mysql:/etc/mysql/conf.d/
rm -rf /home/custom_mysql_config.cnf
docker restart nginx
docker restart php
docker restart php74
docker restart mysql
echo "LDNMP环境已设置成 高性能模式"
;;
0)
break
;;
*)
echo "无效的选择，请重新输入。"
;;
esac
break_end
done
;;
37)
clear
docker rm -f nginx php php74 mysql redis
docker rmi nginx nginx:alpine php:fpm php:fpm-alpine php:7.4.33-fpm php:7.4-fpm-alpine mysql redis redis:alpine
check_port
install_dependency
install_docker
install_ldnmp
;;
38)
clear
read -p "强烈建议先备份全部网站数据，再卸载LDNMP环境。确定删除所有网站数据吗？(Y/N): " choice
case "$choice" in
[Yy])
docker rm -f nginx php php74 mysql redis
docker rmi nginx nginx:alpine php:fpm php:fpm-alpine php:7.4.33-fpm php:7.4-fpm-alpine mysql redis redis:alpine
rm -rf /home/web
;;
[Nn])
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
;;
0)
kejilion
;;
*)
echo "无效的输入!"
esac
break_end
done
;;
11)
while true; do
clear
echo "▶ 面板工具"
echo "------------------------"
echo "1. 宝塔面板官方版 2. aaPanel宝塔国际版"
echo "3. 1Panel新一代管理面板 4. NginxProxyManager可视化面板"
echo "5. AList多存储文件列表程序 6. Ubuntu远程桌面网页版"
echo "7. 哪吒探针VPS监控面板 8. QB离线BT磁力下载面板"
echo "9. Poste.io邮件服务器程序 10. RocketChat多人在线聊天系统"
echo "11. 禅道项目管理软件 12. 青龙面板定时任务管理平台"
echo "13. Cloudreve网盘 14. 简单图床图片管理程序"
echo "15. emby多媒体管理系统 16. Speedtest测速面板"
echo "17. AdGuardHome去广告软件 18. onlyoffice在线办公OFFICE"
echo "19. 雷池WAF防火墙面板 20. portainer容器管理面板"
echo "21. VScode网页版 22. UptimeKuma监控工具"
echo "23. Memos网页备忘录"
echo "25. Nextcloud网盘 26. QD-Today定时任务管理框架"
echo "27. Dockge容器堆栈管理面板 28. LibreSpeed测速工具"
echo "29. searxng聚合搜索站 30. PhotoPrism私有相册系统"
echo "31. StirlingPDF工具大全 32. drawio免费的在线图表软件"
echo "------------------------"
echo "51. PVE开小鸡面板"
echo "------------------------"
echo "0. 返回主菜单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
if [ -f "/etc/init.d/bt" ] && [ -d "/www/server/panel" ]; then
clear
echo "宝塔面板已安装，应用操作"
echo ""
echo "------------------------"
echo "1. 管理宝塔面板 2. 卸载宝塔面板"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
# 更新宝塔面板操作
bt
;;
2)
clear
curl -o bt-uninstall.sh http://download.bt.cn/install/bt-uninstall.sh > /dev/null 2>&1
chmod +x bt-uninstall.sh
./bt-uninstall.sh
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
else
clear
echo "安装提示"
echo "如果您已经安装了其他面板工具或者LDNMP建站环境，建议先卸载，再安装宝塔面板！"
echo "会根据系统自动安装，支持Debian，Ubuntu，Centos"
echo "官网介绍: https://www.bt.cn/new/index.html"
echo ""
# 获取当前系统类型
get_system_type() {
if [ -f /etc/os-release ]; then
. /etc/os-release
if [ "$ID" == "centos" ]; then
echo "centos"
elif [ "$ID" == "ubuntu" ]; then
echo "ubuntu"
elif [ "$ID" == "debian" ]; then
echo "debian"
else
echo "unknown"
fi
else
echo "unknown"
fi
}
system_type=$(get_system_type)
if [ "$system_type" == "unknown" ]; then
echo "不支持的操作系统类型"
else
read -p "确定安装宝塔吗？(Y/N): " choice
case "$choice" in
[Yy])
iptables_open
install wget
if [ "$system_type" == "centos" ]; then
yum install -y wget && wget -O install.sh https://download.bt.cn/install/install_6.0.sh && sh install.sh ed8484bec
elif [ "$system_type" == "ubuntu" ]; then
wget -O install.sh https://download.bt.cn/install/install-ubuntu_6.0.sh && bash install.sh ed8484bec
elif [ "$system_type" == "debian" ]; then
wget -O install.sh https://download.bt.cn/install/install-ubuntu_6.0.sh && bash install.sh ed8484bec
fi
;;
[Nn])
;;
*)
;;
esac
fi
fi
;;
2)
if [ -f "/etc/init.d/bt" ] && [ -d "/www/server/panel" ]; then
clear
echo "aaPanel已安装，应用操作"
echo ""
echo "------------------------"
echo "1. 管理aaPanel 2. 卸载aaPanel"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
# 更新aaPanel操作
bt
;;
2)
clear
curl -o bt-uninstall.sh http://download.bt.cn/install/bt-uninstall.sh > /dev/null 2>&1
chmod +x bt-uninstall.sh
./bt-uninstall.sh
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
else
clear
echo "安装提示"
echo "如果您已经安装了其他面板工具或者LDNMP建站环境，建议先卸载，再安装aaPanel！"
echo "会根据系统自动安装，支持Debian，Ubuntu，Centos"
echo "官网介绍: https://www.aapanel.com/new/index.html"
echo ""
# 获取当前系统类型
get_system_type() {
if [ -f /etc/os-release ]; then
. /etc/os-release
if [ "$ID" == "centos" ]; then
echo "centos"
elif [ "$ID" == "ubuntu" ]; then
echo "ubuntu"
elif [ "$ID" == "debian" ]; then
echo "debian"
else
echo "unknown"
fi
else
echo "unknown"
fi
}
system_type=$(get_system_type)
if [ "$system_type" == "unknown" ]; then
echo "不支持的操作系统类型"
else
read -p "确定安装aaPanel吗？(Y/N): " choice
case "$choice" in
[Yy])
iptables_open
install wget
if [ "$system_type" == "centos" ]; then
yum install -y wget && wget -O install.sh http://www.aapanel.com/script/install_6.0_en.sh && bash install.sh aapanel
elif [ "$system_type" == "ubuntu" ]; then
wget -O install.sh http://www.aapanel.com/script/install-ubuntu_6.0_en.sh && bash install.sh aapanel
elif [ "$system_type" == "debian" ]; then
wget -O install.sh http://www.aapanel.com/script/install-ubuntu_6.0_en.sh && bash install.sh aapanel
fi
;;
[Nn])
;;
*)
;;
esac
fi
fi
;;
3)
if command -v 1pctl &> /dev/null; then
clear
echo "1Panel已安装，应用操作"
echo ""
echo "------------------------"
echo "1. 查看1Panel信息 2. 卸载1Panel"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
1pctl user-info
1pctl update password
;;
2)
clear
1pctl uninstall
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
else
clear
echo "安装提示"
echo "如果您已经安装了其他面板工具或者LDNMP建站环境，建议先卸载，再安装1Panel！"
echo "会根据系统自动安装，支持Debian，Ubuntu，Centos"
echo "官网介绍: https://1panel.cn/"
echo ""
# 获取当前系统类型
get_system_type() {
if [ -f /etc/os-release ]; then
. /etc/os-release
if [ "$ID" == "centos" ]; then
echo "centos"
elif [ "$ID" == "ubuntu" ]; then
echo "ubuntu"
elif [ "$ID" == "debian" ]; then
echo "debian"
else
echo "unknown"
fi
else
echo "unknown"
fi
}
system_type=$(get_system_type)
if [ "$system_type" == "unknown" ]; then
echo "不支持的操作系统类型"
else
read -p "确定安装1Panel吗？(Y/N): " choice
case "$choice" in
[Yy])
iptables_open
install_docker
if [ "$system_type" == "centos" ]; then
curl -sSL https://resource.fit2cloud.com/1panel/package/quick_start.sh -o quick_start.sh && sh quick_start.sh
elif [ "$system_type" == "ubuntu" ]; then
curl -sSL https://resource.fit2cloud.com/1panel/package/quick_start.sh -o quick_start.sh && bash quick_start.sh
elif [ "$system_type" == "debian" ]; then
curl -sSL https://resource.fit2cloud.com/1panel/package/quick_start.sh -o quick_start.sh && bash quick_start.sh
fi
;;
[Nn])
;;
*)
;;
esac
fi
fi
;;
4)
docker_name="npm"
docker_img="jc21/nginx-proxy-manager:latest"
docker_port=81
docker_rum="docker run -d \
--name=$docker_name \
-p 80:80 \
-p 81:$docker_port \
-p 443:443 \
-v /home/docker/npm/data:/data \
-v /home/docker/npm/letsencrypt:/etc/letsencrypt \
--restart=always \
$docker_img"
docker_describe="如果您已经安装了其他面板工具或者LDNMP建站环境，建议先卸载，再安装npm！"
docker_url="官网介绍: https://nginxproxymanager.com/"
docker_use="echo \"初始用户名: admin@example.com\""
docker_passwd="echo \"初始密码: changeme\""
docker_app
;;
5)
docker_name="alist"
docker_img="xhofe/alist:latest"
docker_port=5244
docker_rum="docker run -d \
--restart=always \
-v /home/docker/alist:/opt/alist/data \
-p 5244:5244 \
-e PUID=0 \
-e PGID=0 \
-e UMASK=022 \
--name="alist" \
xhofe/alist:latest"
docker_describe="一个支持多种存储，支持网页浏览和 WebDAV 的文件列表程序，由 gin 和 Solidjs 驱动"
docker_url="官网介绍: https://alist.nn.ci/zh/"
docker_use="docker exec -it alist ./alist admin random"
docker_passwd=""
docker_app
;;
6)
docker_name="ubuntu-novnc"
docker_img="fredblgr/ubuntu-novnc:20.04"
docker_port=6080
rootpasswd=$(< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c16)
docker_rum="docker run -d \
--name ubuntu-novnc \
-p 6080:80 \
-v /home/docker/ubuntu-novnc:/workspace:rw \
-e HTTP_PASSWORD=$rootpasswd \
-e RESOLUTION=1280x720 \
--restart=always \
fredblgr/ubuntu-novnc:20.04"
docker_describe="一个网页版Ubuntu远程桌面，挺好用的！"
docker_url="官网介绍: https://hub.docker.com/r/fredblgr/ubuntu-novnc"
docker_use="echo \"用户名: root\""
docker_passwd="echo \"密码: $rootpasswd\""
docker_app
;;
7)
clear
curl -L https://raw.gitmirror.com/naiba/nezha/master/script/install.sh -o nezha.sh && chmod +x nezha.sh
./nezha.sh
;;
8)
docker_name="qbittorrent"
docker_img="lscr.io/linuxserver/qbittorrent:latest"
docker_port=8081
docker_rum="docker run -d \
--name=qbittorrent \
-e PUID=1000 \
-e PGID=1000 \
-e TZ=Etc/UTC \
-e WEBUI_PORT=8081 \
-p 8081:8081 \
-p 6881:6881 \
-p 6881:6881/udp \
-v /home/docker/qbittorrent/config:/config \
-v /home/docker/qbittorrent/downloads:/downloads \
--restart unless-stopped \
lscr.io/linuxserver/qbittorrent:latest"
docker_describe="qbittorrent离线BT磁力下载服务"
docker_url="官网介绍: https://hub.docker.com/r/linuxserver/qbittorrent"
docker_use="sleep 3"
docker_passwd="docker logs qbittorrent"
docker_app
;;
9)
if docker inspect mailserver &>/dev/null; then
clear
echo "poste.io已安装，访问地址: "
yuming=$(cat /home/docker/mail.txt)
echo "https://$yuming"
echo ""
echo "应用操作"
echo "------------------------"
echo "1. 更新应用 2. 卸载应用"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
docker rm -f mailserver
docker rmi -f analogic/poste.io
yuming=$(cat /home/docker/mail.txt)
docker run \
--net=host \
-e TZ=Europe/Prague \
-v /home/docker/mail:/data \
--name "mailserver" \
-h "$yuming" \
--restart=always \
-d analogic/poste.io
clear
echo "poste.io已经安装完成"
echo "------------------------"
echo "您可以使用以下地址访问poste.io:"
echo "https://$yuming"
echo ""
;;
2)
clear
docker rm -f mailserver
docker rmi -f analogic/poste.io
rm /home/docker/mail.txt
rm -rf /home/docker/mail
echo "应用已卸载"
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
else
clear
install telnet
clear
echo ""
echo "端口检测"
port=25
timeout=3
if echo "quit" | timeout $timeout telnet smtp.qq.com $port | grep 'Connected'; then
echo -e "\e[32m端口$port当前可用\e[0m"
else
echo -e "\e[31m端口$port当前不可用\e[0m"
fi
echo "------------------------"
echo ""
echo "安装提示"
echo "poste.io一个邮件服务器，确保80和443端口没被占用，确保25端口开放"
echo "官网介绍: https://hub.docker.com/r/analogic/poste.io"
echo ""
# 提示用户确认安装
read -p "确定安装poste.io吗？(Y/N): " choice
case "$choice" in
[Yy])
clear
read -p "请设置邮箱域名 例如 mail.yuming.com : " yuming
mkdir -p /home/docker # 递归创建目录
echo "$yuming" > /home/docker/mail.txt # 写入文件
echo "------------------------"
ip_address
echo "先解析这些DNS记录"
echo "A mail $ipv4_address"
echo "CNAME imap $yuming"
echo "CNAME pop $yuming"
echo "CNAME smtp $yuming"
echo "MX @ $yuming"
echo "TXT @ v=spf1 mx ~all"
echo "TXT ? ?"
echo ""
echo "------------------------"
echo "按任意键继续..."
read -n 1 -s -r -p ""
install_docker
docker run \
--net=host \
-e TZ=Europe/Prague \
-v /home/docker/mail:/data \
--name "mailserver" \
-h "$yuming" \
--restart=always \
-d analogic/poste.io
clear
echo "poste.io已经安装完成"
echo "------------------------"
echo "您可以使用以下地址访问poste.io:"
echo "https://$yuming"
echo ""
;;
[Nn])
;;
*)
;;
esac
fi
;;
10)
if docker inspect rocketchat &>/dev/null; then
clear
echo "rocket.chat已安装，访问地址: "
ip_address
echo "http:$ipv4_address:3897"
echo ""
echo "应用操作"
echo "------------------------"
echo "1. 更新应用 2. 卸载应用"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
docker rm -f rocketchat
docker rmi -f rocket.chat:6.3
docker run --name rocketchat --restart=always -p 3897:3000 --link db --env ROOT_URL=http://localhost --env MONGO_OPLOG_URL=mongodb://db:27017/rs5 -d rocket.chat
clear
ip_address
echo "rocket.chat已经安装完成"
echo "------------------------"
echo "多等一会，您可以使用以下地址访问rocket.chat:"
echo "http:$ipv4_address:3897"
echo ""
;;
2)
clear
docker rm -f rocketchat
docker rmi -f rocket.chat
docker rmi -f rocket.chat:6.3
docker rm -f db
docker rmi -f mongo:latest
# docker rmi -f mongo:6
rm -rf /home/docker/mongo
echo "应用已卸载"
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
else
clear
echo "安装提示"
echo "rocket.chat国外知名开源多人聊天系统"
echo "官网介绍: https://www.rocket.chat"
echo ""
# 提示用户确认安装
read -p "确定安装rocket.chat吗？(Y/N): " choice
case "$choice" in
[Yy])
clear
install_docker
docker run --name db -d --restart=always \
-v /home/docker/mongo/dump:/dump \
mongo:latest --replSet rs5 --oplogSize 256
sleep 1
docker exec -it db mongosh --eval "printjson(rs.initiate())"
sleep 5
docker run --name rocketchat --restart=always -p 3897:3000 --link db --env ROOT_URL=http://localhost --env MONGO_OPLOG_URL=mongodb://db:27017/rs5 -d rocket.chat:6.3
clear
ip_address
echo "rocket.chat已经安装完成"
echo "------------------------"
echo "多等一会，您可以使用以下地址访问rocket.chat:"
echo "http:$ipv4_address:3897"
echo ""
;;
[Nn])
;;
*)
;;
esac
fi
;;
11)
docker_name="zentao-server"
docker_img="idoop/zentao:latest"
docker_port=82
docker_rum="docker run -d -p 82:80 -p 3308:3306 \
-e ADMINER_USER="root" -e ADMINER_PASSWD="password" \
-e BIND_ADDRESS="false" \
-v /home/docker/zentao-server/:/opt/zbox/ \
--add-host smtp.exmail.qq.com:163.177.90.125 \
--name zentao-server \
--restart=always \
idoop/zentao:latest"
docker_describe="禅道是通用的项目管理软件"
docker_url="官网介绍: https://www.zentao.net/"
docker_use="echo \"初始用户名: admin\""
docker_passwd="echo \"初始密码: 123456\""
docker_app
;;
12)
docker_name="qinglong"
docker_img="whyour/qinglong:latest"
docker_port=5700
docker_rum="docker run -d \
-v /home/docker/qinglong/data:/ql/data \
-p 5700:5700 \
--name qinglong \
--hostname qinglong \
--restart unless-stopped \
whyour/qinglong:latest"
docker_describe="青龙面板是一个定时任务管理平台"
docker_url="官网介绍: https://hub.gitmirror.com/https://github.com/whyour/qinglong"
docker_use=""
docker_passwd=""
docker_app
;;
13)
if docker inspect cloudreve &>/dev/null; then
clear
echo "cloudreve已安装，访问地址: "
ip_address
echo "http:$ipv4_address:5212"
echo ""
echo "应用操作"
echo "------------------------"
echo "1. 更新应用 2. 卸载应用"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
docker rm -f cloudreve
docker rmi -f cloudreve/cloudreve:latest
docker rm -f aria2
docker rmi -f p3terx/aria2-pro
cd /home/ && mkdir -p docker/cloud && cd docker/cloud && mkdir temp_data && mkdir -vp cloudreve/{uploads,avatar} && touch cloudreve/conf.ini && touch cloudreve/cloudreve.db && mkdir -p aria2/config && mkdir -p data/aria2 && chmod -R 777 data/aria2
curl -o /home/docker/cloud/docker-compose.yml https://raw.gitmirror.com/kejilion/docker/main/cloudreve-docker-compose.yml
cd /home/docker/cloud/ && docker-compose up -d
clear
echo "cloudreve已经安装完成"
echo "------------------------"
echo "您可以使用以下地址访问cloudreve:"
ip_address
echo "http:$ipv4_address:5212"
sleep 3
docker logs cloudreve
echo ""
;;
2)
clear
docker rm -f cloudreve
docker rmi -f cloudreve/cloudreve:latest
docker rm -f aria2
docker rmi -f p3terx/aria2-pro
rm -rf /home/docker/cloud
echo "应用已卸载"
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
else
clear
echo "安装提示"
echo "cloudreve是一个支持多家云存储的网盘系统"
echo "官网介绍: https://cloudreve.org/"
echo ""
# 提示用户确认安装
read -p "确定安装cloudreve吗？(Y/N): " choice
case "$choice" in
[Yy])
clear
install_docker
cd /home/ && mkdir -p docker/cloud && cd docker/cloud && mkdir temp_data && mkdir -vp cloudreve/{uploads,avatar} && touch cloudreve/conf.ini && touch cloudreve/cloudreve.db && mkdir -p aria2/config && mkdir -p data/aria2 && chmod -R 777 data/aria2
curl -o /home/docker/cloud/docker-compose.yml https://raw.gitmirror.com/kejilion/docker/main/cloudreve-docker-compose.yml
cd /home/docker/cloud/ && docker-compose up -d
clear
echo "cloudreve已经安装完成"
echo "------------------------"
echo "您可以使用以下地址访问cloudreve:"
ip_address
echo "http:$ipv4_address:5212"
sleep 3
docker logs cloudreve
echo ""
;;
[Nn])
;;
*)
;;
esac
fi
;;
14)
docker_name="easyimage"
docker_img="ddsderek/easyimage:latest"
docker_port=85
docker_rum="docker run -d \
--name easyimage \
-p 85:80 \
-e TZ=Asia/Shanghai \
-e PUID=1000 \
-e PGID=1000 \
-v /home/docker/easyimage/config:/app/web/config \
-v /home/docker/easyimage/i:/app/web/i \
--restart unless-stopped \
ddsderek/easyimage:latest"
docker_describe="简单图床是一个简单的图床程序"
docker_url="官网介绍: https://hub.gitmirror.com/https://github.com/icret/EasyImages2.0"
docker_use=""
docker_passwd=""
docker_app
;;
15)
docker_name="emby"
docker_img="linuxserver/emby:latest"
docker_port=8096
docker_rum="docker run -d --name=emby --restart=always \
-v /homeo/docker/emby/config:/config \
-v /homeo/docker/emby/share1:/mnt/share1 \
-v /homeo/docker/emby/share2:/mnt/share2 \
-v /mnt/notify:/mnt/notify \
-p 8096:8096 -p 8920:8920 \
-e UID=1000 -e GID=100 -e GIDLIST=100 \
linuxserver/emby:latest"
docker_describe="emby是一个主从式架构的媒体服务器软件，可以用来整理服务器上的视频和音频，并将音频和视频流式传输到客户端设备"
docker_url="官网介绍: https://emby.media/"
docker_use=""
docker_passwd=""
docker_app
;;
16)
docker_name="looking-glass"
docker_img="wikihostinc/looking-glass-server"
docker_port=89
docker_rum="docker run -d --name looking-glass --restart always -p 89:80 wikihostinc/looking-glass-server"
docker_describe="Speedtest测速面板是一个VPS网速测试工具，多项测试功能，还可以实时监控VPS进出站流量"
docker_url="官网介绍: https://hub.gitmirror.com/https://github.com/wikihost-opensource/als"
docker_use=""
docker_passwd=""
docker_app
;;
17)
docker_name="adguardhome"
docker_img="adguard/adguardhome"
docker_port=3000
docker_rum="docker run -d \
--name adguardhome \
-v /home/docker/adguardhome/work:/opt/adguardhome/work \
-v /home/docker/adguardhome/conf:/opt/adguardhome/conf \
-p 53:53/tcp \
-p 53:53/udp \
-p 3000:3000/tcp \
--restart always \
adguard/adguardhome"
docker_describe="AdGuardHome是一款全网广告拦截与反跟踪软件，未来将不止是一个DNS服务器。"
docker_url="官网介绍: https://hub.docker.com/r/adguard/adguardhome"
docker_use=""
docker_passwd=""
docker_app
;;
18)
docker_name="onlyoffice"
docker_img="onlyoffice/documentserver"
docker_port=8082
docker_rum="docker run -d -p 8082:80 \
--restart=always \
--name onlyoffice \
-v /home/docker/onlyoffice/DocumentServer/logs:/var/log/onlyoffice \
-v /home/docker/onlyoffice/DocumentServer/data:/var/www/onlyoffice/Data \
onlyoffice/documentserver"
docker_describe="onlyoffice是一款开源的在线office工具，太强大了！"
docker_url="官网介绍: https://www.onlyoffice.com/"
docker_use=""
docker_passwd=""
docker_app
;;
19)
if docker inspect safeline-tengine &>/dev/null; then
clear
echo "雷池已安装，访问地址: "
ip_address
echo "http:$ipv4_address:9443"
echo ""
echo "应用操作"
echo "------------------------"
echo "1. 更新应用 2. 卸载应用"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
echo "暂不支持"
echo ""
;;
2)
clear
echo "cd命令到安装目录下执行: docker compose down"
echo ""
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
else
clear
echo "安装提示"
echo "雷池是长亭科技开发的WAF站点防火墙程序面板，可以反代站点进行自动化防御"
echo "80和443端口不能被占用，无法与宝塔，1panel，npm，ldnmp建站共存"
echo "官网介绍: https://hub.gitmirror.com/https://github.com/chaitin/safeline"
echo ""
# 提示用户确认安装
read -p "确定安装吗？(Y/N): " choice
case "$choice" in
[Yy])
clear
install_docker
bash -c "$(curl -fsSLk https://waf-ce.chaitin.cn/release/latest/setup.sh)"
clear
echo "雷池WAF面板已经安装完成"
echo "------------------------"
echo "您可以使用以下地址访问:"
ip_address
echo "http:$ipv4_address:9443"
echo ""
;;
[Nn])
;;
*)
;;
esac
fi
;;
20)
docker_name="portainer"
docker_img="portainer/portainer"
docker_port=9050
docker_rum="docker run -d \
--name portainer \
-p 9050:9000 \
-v /var/run/docker.sock:/var/run/docker.sock \
-v /home/docker/portainer:/data \
--restart always \
portainer/portainer"
docker_describe="portainer是一个轻量级的docker容器管理面板"
docker_url="官网介绍: https://www.portainer.io/"
docker_use=""
docker_passwd=""
docker_app
;;
21)
docker_name="vscode-web"
docker_img="codercom/code-server"
docker_port=8180
docker_rum="docker run -d -p 8180:8080 -v /home/docker/vscode-web:/home/coder/.local/share/code-server --name vscode-web --restart always codercom/code-server"
docker_describe="VScode是一款强大的在线代码编写工具"
docker_url="官网介绍: https://hub.gitmirror.com/https://github.com/coder/code-server"
docker_use="sleep 3"
docker_passwd="docker exec vscode-web cat /home/coder/.config/code-server/config.yaml"
docker_app
;;
22)
docker_name="uptime-kuma"
docker_img="louislam/uptime-kuma:latest"
docker_port=3003
docker_rum="docker run -d \
--name=uptime-kuma \
-p 3003:3001 \
-v /home/docker/uptime-kuma/uptime-kuma-data:/app/data \
--restart=always \
louislam/uptime-kuma:latest"
docker_describe="Uptime Kuma 易于使用的自托管监控工具"
docker_url="官网介绍: https://hub.gitmirror.com/https://github.com/louislam/uptime-kuma"
docker_use=""
docker_passwd=""
docker_app
;;
23)
docker_name="memos"
docker_img="ghcr.io/usememos/memos:latest"
docker_port=5230
docker_rum="docker run -d --name memos -p 5230:5230 -v /home/docker/memos:/var/opt/memos --restart always ghcr.io/usememos/memos:latest"
docker_describe="Memos是一款轻量级、自托管的备忘录中心"
docker_url="官网介绍: https://hub.gitmirror.com/https://github.com/usememos/memos"
docker_use=""
docker_passwd=""
docker_app
;;
25)
docker_name="nextcloud"
docker_img="nextcloud:latest"
docker_port=8989
rootpasswd=$(< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c16)
docker_rum="docker run -d --name nextcloud --restart=always -p 8989:80 -v /home/docker/nextcloud:/var/www/html -e NEXTCLOUD_ADMIN_USER=nextcloud -e NEXTCLOUD_ADMIN_PASSWORD=$rootpasswd nextcloud"
docker_describe="Nextcloud拥有超过 400,000 个部署，是您可以下载的最受欢迎的本地内容协作平台"
docker_url="官网介绍: https://nextcloud.com/"
docker_use="echo \"账号: nextcloud 密码: $rootpasswd\""
docker_passwd=""
docker_app
;;
26)
docker_name="qd"
docker_img="qdtoday/qd:latest"
docker_port=8923
docker_rum="docker run -d --name qd -p 8923:80 -v /home/docker/qd/config:/usr/src/app/config qdtoday/qd"
docker_describe="QD-Today是一个HTTP请求定时任务自动执行框架"
docker_url="官网介绍: https://qd-today.github.io/qd/zh_CN/"
docker_use=""
docker_passwd=""
docker_app
;;
27)
docker_name="dockge"
docker_img="louislam/dockge:latest"
docker_port=5003
docker_rum="docker run -d --name dockge --restart unless-stopped -p 5003:5001 -v /var/run/docker.sock:/var/run/docker.sock -v /home/docker/dockge/data:/app/data -v /home/docker/dockge/stacks:/opt/stacks -e DOCKGE_STACKS_DIR=/home/docker/dockge/stacks louislam/dockge"
docker_describe="dockge是一个可视化的docker-compose容器管理面板"
docker_url="官网介绍: https://hub.gitmirror.com/https://github.com/louislam/dockge"
docker_use=""
docker_passwd=""
docker_app
;;
28)
docker_name="speedtest"
docker_img="ghcr.io/librespeed/speedtest:latest"
docker_port=6681
docker_rum="docker run -d \
--name speedtest \
--restart always \
-e MODE=standalone \
-p 6681:80 \
ghcr.io/librespeed/speedtest:latest"
docker_describe="librespeed是用Javascript实现的轻量级速度测试工具，即开即用"
docker_url="官网介绍: https://hub.gitmirror.com/https://github.com/librespeed/speedtest"
docker_use=""
docker_passwd=""
docker_app
;;
29)
docker_name="searxng"
docker_img="alandoyle/searxng:latest"
docker_port=8700
docker_rum="docker run --name=searxng \
-d --init \
--restart=unless-stopped \
-v /home/docker/searxng/config:/etc/searxng \
-v /home/docker/searxng/templates:/usr/local/searxng/searx/templates/simple \
-v /home/docker/searxng/theme:/usr/local/searxng/searx/static/themes/simple \
-p 8700:8080/tcp \
alandoyle/searxng:latest"
docker_describe="searxng是一个私有且隐私的搜索引擎站点"
docker_url="官网介绍: https://hub.docker.com/r/alandoyle/searxng"
docker_use=""
docker_passwd=""
docker_app
;;
30)
docker_name="photoprism"
docker_img="photoprism/photoprism:latest"
docker_port=2342
rootpasswd=$(< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c16)
docker_rum="docker run -d \
--name photoprism \
--restart always \
--security-opt seccomp=unconfined \
--security-opt apparmor=unconfined \
-p 2342:2342 \
-e PHOTOPRISM_UPLOAD_NSFW="true" \
-e PHOTOPRISM_ADMIN_PASSWORD="$rootpasswd" \
-v /home/docker/photoprism/storage:/photoprism/storage \
-v /home/docker/photoprism/Pictures:/photoprism/originals \
photoprism/photoprism"
docker_describe="photoprism非常强大的私有相册系统"
docker_url="官网介绍: https://www.photoprism.app/"
docker_use="echo \"账号: admin 密码: $rootpasswd\""
docker_passwd=""
docker_app
;;
31)
docker_name="s-pdf"
docker_img="frooodle/s-pdf:latest"
docker_port=8020
docker_rum="docker run -d \
--name s-pdf \
--restart=always \
-p 8020:8080 \
-v /home/docker/s-pdf/trainingData:/usr/share/tesseract-ocr/5/tessdata \
-v /home/docker/s-pdf/extraConfigs:/configs \
-v /home/docker/s-pdf/logs:/logs \
-e DOCKER_ENABLE_SECURITY=false \
frooodle/s-pdf:latest"
docker_describe="这是一个强大的本地托管基于 Web 的 PDF 操作工具，使用 docker，允许您对 PDF 文件执行各种操作，例如拆分合并、转换、重新组织、添加图像、旋转、压缩等。"
docker_url="官网介绍: https://hub.gitmirror.com/https://github.com/Stirling-Tools/Stirling-PDF"
docker_use=""
docker_passwd=""
docker_app
;;
32)
docker_name="drawio"
docker_img="jgraph/drawio"
docker_port=7080
docker_rum="docker run -d --restart=always --name drawio -p 7080:8080 -v /home/docker/drawio:/var/lib/drawio jgraph/drawio"
docker_describe="这是一个强大图表绘制软件。思维导图，拓扑图，流程图，都能画"
docker_url="官网介绍: https://www.drawio.com/"
docker_use=""
docker_passwd=""
docker_app
;;
51)
clear
curl -L https://raw.gitmirror.com/oneclickvirt/pve/main/scripts/install_pve.sh -o install_pve.sh && chmod +x install_pve.sh && bash install_pve.sh
;;
0)
kejilion
;;
*)
echo "无效的输入!"
;;
esac
break_end
done
;;
12)
while true; do
clear
echo "▶ 我的工作区"
echo "系统将为你提供5个后台运行的工作区，你可以用来执行长时间的任务"
echo "即使你断开SSH，工作区中的任务也不会中断，非常方便！来试试吧！"
echo -e "\033[33m注意: 进入工作区后使用Ctrl+b再单独按d，退出工作区！\033[0m"
echo "------------------------"
echo "a. 安装工作区环境"
echo "------------------------"
echo "1. 1号工作区"
echo "2. 2号工作区"
echo "3. 3号工作区"
echo "4. 4号工作区"
echo "5. 5号工作区"
echo "6. 6号工作区"
echo "7. 7号工作区"
echo "8. 8号工作区"
echo "9. 9号工作区"
echo "10. 10号工作区"
echo "------------------------"
echo "99. 工作区状态"
echo "------------------------"
echo "b. 卸载工作区"
echo "------------------------"
echo "0. 返回主菜单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
a)
clear
install tmux
;;
b)
clear
remove tmux
;;
1)
clear
SESSION_NAME="work1"
tmux_run
;;
2)
clear
SESSION_NAME="work2"
tmux_run
;;
3)
clear
SESSION_NAME="work3"
tmux_run
;;
4)
clear
SESSION_NAME="work4"
tmux_run
;;
5)
clear
SESSION_NAME="work5"
tmux_run
;;
6)
clear
SESSION_NAME="work6"
tmux_run
;;
7)
clear
SESSION_NAME="work7"
tmux_run
;;
8)
clear
SESSION_NAME="work8"
tmux_run
;;
9)
clear
SESSION_NAME="work9"
tmux_run
;;
10)
clear
SESSION_NAME="work10"
tmux_run
;;
99)
clear
tmux list-sessions
;;
0)
kejilion
;;
*)
echo "无效的输入!"
;;
esac
break_end
done
;;
13)
while true; do
clear
echo "▶ 系统工具"
echo "------------------------"
echo "1. 设置脚本启动快捷键"
echo "------------------------"
echo "2. 修改ROOT密码"
echo "3. 开启ROOT密码登录模式"
echo "4. 安装Python最新版"
echo "5. 开放所有端口"
echo "6. 修改SSH连接端口"
echo "7. 优化DNS地址"
echo "8. 一键重装系统"
echo "9. 禁用ROOT账户创建新账户"
echo "10. 切换优先ipv4/ipv6"
echo "11. 查看端口占用状态"
echo "12. 修改虚拟内存大小"
echo "13. 用户管理"
echo "14. 用户/密码生成器"
echo "15. 系统时区调整"
echo "16. 设置BBR3加速"
echo "17. 防火墙高级管理器"
echo "18. 修改主机名"
echo "19. 切换系统更新源"
echo "20. 定时任务管理"
echo "21. 本机host解析"
echo "22. fail2banSSH防御程序"
echo "------------------------"
echo "31. 留言板"
echo "------------------------"
echo "99. 重启服务器"
echo "------------------------"
echo "0. 返回主菜单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
read -p "请输入你的快捷按键: " kuaijiejian
echo "alias $kuaijiejian='~/kejilion.sh'" >> ~/.bashrc
source ~/.bashrc
echo "快捷键已设置"
;;
2)
clear
echo "设置你的ROOT密码"
passwd
;;
3)
clear
echo "设置你的ROOT密码"
passwd
sed -i 's/^#\?PermitRootLogin.*/PermitRootLogin yes/g' /etc/ssh/sshd_config;
sed -i 's/^#\?PasswordAuthentication.*/PasswordAuthentication yes/g' /etc/ssh/sshd_config;
service sshd restart
echo "ROOT登录设置完毕！"
read -p "需要重启服务器吗？(Y/N): " choice
case "$choice" in
[Yy])
reboot
;;
[Nn])
echo "已取消"
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
;;
4)
clear
RED="\033[31m"
GREEN="\033[32m"
YELLOW="\033[33m"
NC="\033[0m"
# 系统检测
OS=$(cat /etc/os-release | grep -o -E "Debian|Ubuntu|CentOS" | head -n 1)
if [[ $OS == "Debian" || $OS == "Ubuntu" || $OS == "CentOS" ]]; then
echo -e "检测到你的系统是 ${YELLOW}${OS}${NC}"
else
echo -e "${RED}很抱歉，你的系统不受支持！${NC}"
exit 1
fi
# 检测安装Python3的版本
VERSION=$(python3 -V 2>&1 | awk '{print $2}')
# 获取最新Python3版本
PY_VERSION=$(curl -s https://www.python.org/ | grep "downloads/release" | grep -o 'Python [0-9.]*' | grep -o '[0-9.]*')
# 卸载Python3旧版本
if [[ $VERSION == "3"* ]]; then
echo -e "${YELLOW}你的Python3版本是${NC}${RED}${VERSION}${NC}，${YELLOW}最新版本是${NC}${RED}${PY_VERSION}${NC}"
read -p "是否确认升级最新版Python3？默认不升级 [y/N]: " CONFIRM
if [[ $CONFIRM == "y" ]]; then
if [[ $OS == "CentOS" ]]; then
echo ""
rm-rf /usr/local/python3* >/dev/null 2>&1
else
apt --purge remove python3 python3-pip -y
rm-rf /usr/local/python3*
fi
else
echo -e "${YELLOW}已取消升级Python3${NC}"
exit 1
fi
else
echo -e "${RED}检测到没有安装Python3。${NC}"
read -p "是否确认安装最新版Python3？默认安装 [Y/n]: " CONFIRM
if [[ $CONFIRM != "n" ]]; then
echo -e "${GREEN}开始安装最新版Python3...${NC}"
else
echo -e "${YELLOW}已取消安装Python3${NC}"
exit 1
fi
fi
# 安装相关依赖
if [[ $OS == "CentOS" ]]; then
yum update
yum groupinstall -y "development tools"
yum install wget openssl-devel bzip2-devel libffi-devel zlib-devel -y
else
apt update
apt install wget build-essential libreadline-dev libncursesw5-dev libssl-dev libsqlite3-dev tk-dev libgdbm-dev libc6-dev libbz2-dev libffi-dev zlib1g-dev -y
fi
# 安装python3
cd /root/
wget https://www.python.org/ftp/python/${PY_VERSION}/Python-"$PY_VERSION".tgz
tar -zxf Python-${PY_VERSION}.tgz
cd Python-${PY_VERSION}
./configure --prefix=/usr/local/python3
make -j $(nproc)
make install
if [ $? -eq 0 ];then
rm -f /usr/local/bin/python3*
rm -f /usr/local/bin/pip3*
ln -sf /usr/local/python3/bin/python3 /usr/bin/python3
ln -sf /usr/local/python3/bin/pip3 /usr/bin/pip3
clear
echo -e "${YELLOW}Python3安装${GREEN}成功，${NC}版本为: ${NC}${GREEN}${PY_VERSION}${NC}"
else
clear
echo -e "${RED}Python3安装失败！${NC}"
exit 1
fi
cd /root/ && rm -rf Python-${PY_VERSION}.tgz && rm -rf Python-${PY_VERSION}
;;
5)
clear
iptables_open
remove iptables-persistent ufw firewalld iptables-services > /dev/null 2>&1
echo "端口已全部开放"
;;
6)
clear
#!/bin/bash
# 去掉 #Port 的注释
sed -i 's/#Port/Port/' /etc/ssh/sshd_config
# 读取当前的 SSH 端口号
current_port=$(grep -E '^ *Port [0-9]+' /etc/ssh/sshd_config | awk '{print $2}')
# 打印当前的 SSH 端口号
echo "当前的 SSH 端口号是: $current_port"
echo "------------------------"
# 提示用户输入新的 SSH 端口号
read -p "请输入新的 SSH 端口号: " new_port
# 备份 SSH 配置文件
cp /etc/ssh/sshd_config /etc/ssh/sshd_config.bak
# 替换 SSH 配置文件中的端口号
sed -i "s/Port [0-9]\+/Port $new_port/g" /etc/ssh/sshd_config
# 重启 SSH 服务
service sshd restart
echo "SSH 端口已修改为: $new_port"
clear
iptables_open
remove iptables-persistent ufw firewalld iptables-services > /dev/null 2>&1
;;
7)
clear
echo "当前DNS地址"
echo "------------------------"
cat /etc/resolv.conf
echo "------------------------"
echo ""
# 询问用户是否要优化DNS设置
read -p "是否要设置为Cloudflare和Google的DNS地址？(y/n): " choice
if [ "$choice" == "y" ]; then
# 定义DNS地址
cloudflare_ipv4="1.1.1.1"
google_ipv4="8.8.8.8"
cloudflare_ipv6="2606:4700:4700::1111"
google_ipv6="2001:4860:4860::8888"
# 检查机器是否有IPv6地址
ipv6_available=0
if [[ $(ip -6 addr | grep -c "inet6") -gt 0 ]]; then
ipv6_available=1
fi
# 设置DNS地址为Cloudflare和Google（IPv4和IPv6）
echo "设置DNS为Cloudflare和Google"
# 设置IPv4地址
echo "nameserver $cloudflare_ipv4" > /etc/resolv.conf
echo "nameserver $google_ipv4" >> /etc/resolv.conf
# 如果有IPv6地址，则设置IPv6地址
if [[ $ipv6_available -eq 1 ]]; then
echo "nameserver $cloudflare_ipv6" >> /etc/resolv.conf
echo "nameserver $google_ipv6" >> /etc/resolv.conf
fi
echo "DNS地址已更新"
echo "------------------------"
cat /etc/resolv.conf
echo "------------------------"
else
echo "DNS设置未更改"
fi
;;
8)
dd_xitong_1() {
read -p "请输入你重装后的密码: " vpspasswd
echo "任意键继续，重装后初始用户名: root 初始密码: $vpspasswd 初始端口: 22"
read -n 1 -s -r -p ""
install wget
bash <(wget --no-check-certificate -qO- 'https://raw.gitmirror.com/MoeClub/Note/master/InstallNET.sh') $xitong -v 64 -p $vpspasswd -port 22
}
dd_xitong_2() {
echo "任意键继续，重装后初始用户名: root 初始密码: LeitboGi0ro 初始端口: 22"
read -n 1 -s -r -p ""
install wget
wget --no-check-certificate -qO InstallNET.sh 'https://raw.gitmirror.com/leitbogioro/Tools/master/Linux_reinstall/InstallNET.sh' && chmod a+x InstallNET.sh
}
dd_xitong_3() {
echo "任意键继续，重装后初始用户名: Administrator 初始密码: Teddysun.com 初始端口: 3389"
read -n 1 -s -r -p ""
install wget
wget --no-check-certificate -qO InstallNET.sh 'https://raw.gitmirror.com/leitbogioro/Tools/master/Linux_reinstall/InstallNET.sh' && chmod a+x InstallNET.sh
}
clear
echo "请备份数据，将为你重装系统，预计花费15分钟。"
echo -e "\e[37m感谢MollyLau和MoeClub的脚本支持！\e[0m "
read -p "确定继续吗？(Y/N): " choice
case "$choice" in
[Yy])
while true; do
echo "------------------------"
echo "1. Debian 12"
echo "2. Debian 11"
echo "3. Debian 10"
echo "4. Debian 9"
echo "------------------------"
echo "11. Ubuntu 24.04"
echo "12. Ubuntu 22.04"
echo "13. Ubuntu 20.04"
echo "14. Ubuntu 18.04"
echo "------------------------"
echo "21. CentOS 9"
echo "22. CentOS 8"
echo "23. CentOS 7"
echo "------------------------"
echo "31. Alpine 3.19"
echo "------------------------"
echo "41. Windows 11"
echo "42. Windows 10"
echo "43. Windows Server 2022"
echo "44. Windows Server 2019"
echo "44. Windows Server 2016"
echo "------------------------"
read -p "请选择要重装的系统: " sys_choice
case "$sys_choice" in
1)
xitong="-d 12"
dd_xitong_1
exit
reboot
;;
2)
xitong="-d 11"
dd_xitong_1
reboot
exit
;;
3)
xitong="-d 10"
dd_xitong_1
reboot
exit
;;
4)
xitong="-d 9"
dd_xitong_1
reboot
exit
;;
11)
dd_xitong_2
bash InstallNET.sh -ubuntu 24.04
reboot
exit
;;
12)
dd_xitong_2
bash InstallNET.sh -ubuntu 22.04
reboot
exit
;;
13)
xitong="-u 20.04"
dd_xitong_1
reboot
exit
;;
14)
xitong="-u 18.04"
dd_xitong_1
reboot
exit
;;
21)
dd_xitong_2
bash InstallNET.sh -centos 9
reboot
exit
;;
22)
dd_xitong_2
bash InstallNET.sh -centos 8
reboot
exit
;;
23)
dd_xitong_2
bash InstallNET.sh -centos 7
reboot
exit
;;
31)
dd_xitong_2
bash InstallNET.sh -alpine
reboot
exit
;;
41)
dd_xitong_3
bash InstallNET.sh -windows 11 -lang "cn"
reboot
exit
;;
42)
dd_xitong_3
bash InstallNET.sh -windows 10 -lang "cn"
reboot
exit
;;
43)
dd_xitong_3
bash InstallNET.sh -windows 2022 -lang "cn"
reboot
exit
;;
44)
dd_xitong_3
bash InstallNET.sh -windows 2019 -lang "cn"
reboot
exit
;;
45)
dd_xitong_3
bash InstallNET.sh -windows 2016 -lang "cn"
reboot
exit
;;
*)
echo "无效的选择，请重新输入。"
;;
esac
done
;;
[Nn])
echo "已取消"
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
;;
9)
clear
install sudo
# 提示用户输入新用户名
read -p "请输入新用户名: " new_username
# 创建新用户并设置密码
sudo useradd -m -s /bin/bash "$new_username"
sudo passwd "$new_username"
# 赋予新用户sudo权限
echo "$new_username ALL=(ALL:ALL) ALL" | sudo tee -a /etc/sudoers
# 禁用ROOT用户登录
sudo passwd -l root
echo "操作已完成。"
;;
10)
clear
ipv6_disabled=$(sysctl -n net.ipv6.conf.all.disable_ipv6)
echo ""
if [ "$ipv6_disabled" -eq 1 ]; then
echo "当前网络优先级设置: IPv4 优先"
else
echo "当前网络优先级设置: IPv6 优先"
fi
echo "------------------------"
echo ""
echo "切换的网络优先级"
echo "------------------------"
echo "1. IPv4 优先 2. IPv6 优先"
echo "------------------------"
read -p "选择优先的网络: " choice
case $choice in
1)
sysctl -w net.ipv6.conf.all.disable_ipv6=1 > /dev/null 2>&1
echo "已切换为 IPv4 优先"
;;
2)
sysctl -w net.ipv6.conf.all.disable_ipv6=0 > /dev/null 2>&1
echo "已切换为 IPv6 优先"
;;
*)
echo "无效的选择"
;;
esac
;;
11)
clear
ss -tulnape
;;
12)
clear
# 获取当前交换空间信息
swap_used=$(free -m | awk 'NR==3{print $3}')
swap_total=$(free -m | awk 'NR==3{print $2}')
if [ "$swap_total" -eq 0 ]; then
swap_percentage=0
else
swap_percentage=$((swap_used * 100 / swap_total))
fi
swap_info="${swap_used}MB/${swap_total}MB (${swap_percentage}%)"
echo "当前虚拟内存: $swap_info"
read -p "是否调整大小?(Y/N): " choice
case "$choice" in
[Yy])
# 输入新的虚拟内存大小
read -p "请输入虚拟内存大小MB: " new_swap
add_swap
;;
[Nn])
echo "已取消"
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
;;
13)
while true; do
clear
install sudo
clear
# 显示所有用户、用户权限、用户组和是否在sudoers中
echo "用户列表"
echo "----------------------------------------------------------------------------"
printf "%-24s %-34s %-20s %-10s\n" "用户名" "用户权限" "用户组" "sudo权限"
while IFS=: read -r username _ userid groupid _ _ homedir shell; do
groups=$(groups "$username" | cut -d : -f 2)
sudo_status=$(sudo -n -lU "$username" 2>/dev/null | grep -q '(ALL : ALL)' && echo "Yes" || echo "No")
printf "%-20s %-30s %-20s %-10s\n" "$username" "$homedir" "$groups" "$sudo_status"
done < /etc/passwd
echo ""
echo "账户操作"
echo "------------------------"
echo "1. 创建普通账户 2. 创建高级账户"
echo "------------------------"
echo "3. 赋予最高权限 4. 取消最高权限"
echo "------------------------"
echo "5. 删除账号"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
# 提示用户输入新用户名
read -p "请输入新用户名: " new_username
# 创建新用户并设置密码
sudo useradd -m -s /bin/bash "$new_username"
sudo passwd "$new_username"
echo "操作已完成。"
;;
2)
# 提示用户输入新用户名
read -p "请输入新用户名: " new_username
# 创建新用户并设置密码
sudo useradd -m -s /bin/bash "$new_username"
sudo passwd "$new_username"
# 赋予新用户sudo权限
echo "$new_username ALL=(ALL:ALL) ALL" | sudo tee -a /etc/sudoers
echo "操作已完成。"
;;
3)
read -p "请输入用户名: " username
# 赋予新用户sudo权限
echo "$username ALL=(ALL:ALL) ALL" | sudo tee -a /etc/sudoers
;;
4)
read -p "请输入用户名: " username
# 从sudoers文件中移除用户的sudo权限
sudo sed -i "/^$username\sALL=(ALL:ALL)\sALL/d" /etc/sudoers
;;
5)
read -p "请输入要删除的用户名: " username
# 删除用户及其主目录
sudo userdel -r "$username"
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
done
;;
14)
clear
echo "随机用户名"
echo "------------------------"
for i in {1..5}; do
username="user$(< /dev/urandom tr -dc _a-z0-9 | head -c6)"
echo "随机用户名 $i: $username"
done
echo ""
echo "随机姓名"
echo "------------------------"
first_names=("John" "Jane" "Michael" "Emily" "David" "Sophia" "William" "Olivia" "James" "Emma" "Ava" "Liam" "Mia" "Noah" "Isabella")
last_names=("Smith" "Johnson" "Brown" "Davis" "Wilson" "Miller" "Jones" "Garcia" "Martinez" "Williams" "Lee" "Gonzalez" "Rodriguez" "Hernandez")
# 生成5个随机用户姓名
for i in {1..5}; do
first_name_index=$((RANDOM % ${#first_names[@]}))
last_name_index=$((RANDOM % ${#last_names[@]}))
user_name="${first_names[$first_name_index]} ${last_names[$last_name_index]}"
echo "随机用户姓名 $i: $user_name"
done
echo ""
echo "随机UUID"
echo "------------------------"
for i in {1..5}; do
uuid=$(cat /proc/sys/kernel/random/uuid)
echo "随机UUID $i: $uuid"
done
echo ""
echo "16位随机密码"
echo "------------------------"
for i in {1..5}; do
password=$(< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c16)
echo "随机密码 $i: $password"
done
echo ""
echo "32位随机密码"
echo "------------------------"
for i in {1..5}; do
password=$(< /dev/urandom tr -dc _A-Z-a-z-0-9 | head -c32)
echo "随机密码 $i: $password"
done
echo ""
;;
15)
while true; do
clear
echo "系统时间信息"
# 获取当前系统时区
current_timezone=$(timedatectl show --property=Timezone --value)
# 获取当前系统时间
current_time=$(date +"%Y-%m-%d %H:%M:%S")
# 显示时区和时间
echo "当前系统时区：$current_timezone"
echo "当前系统时间：$current_time"
echo ""
echo "时区切换"
echo "亚洲------------------------"
echo "1. 中国上海时间 2. 中国香港时间"
echo "3. 日本东京时间 4. 韩国首尔时间"
echo "5. 新加坡时间 6. 印度加尔各答时间"
echo "7. 阿联酋迪拜时间 8. 澳大利亚悉尼时间"
echo "欧洲------------------------"
echo "11. 英国伦敦时间 12. 法国巴黎时间"
echo "13. 德国柏林时间 14. 俄罗斯莫斯科时间"
echo "15. 荷兰尤特赖赫特时间 16. 西班牙马德里时间"
echo "美洲------------------------"
echo "21. 美国西部时间 22. 美国东部时间"
echo "23. 加拿大时间 24. 墨西哥时间"
echo "25. 巴西时间 26. 阿根廷时间"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1) timedatectl set-timezone Asia/Shanghai ;;
2) timedatectl set-timezone Asia/Hong_Kong ;;
3) timedatectl set-timezone Asia/Tokyo ;;
4) timedatectl set-timezone Asia/Seoul ;;
5) timedatectl set-timezone Asia/Singapore ;;
6) timedatectl set-timezone Asia/Kolkata ;;
7) timedatectl set-timezone Asia/Dubai ;;
8) timedatectl set-timezone Australia/Sydney ;;
11) timedatectl set-timezone Europe/London ;;
12) timedatectl set-timezone Europe/Paris ;;
13) timedatectl set-timezone Europe/Berlin ;;
14) timedatectl set-timezone Europe/Moscow ;;
15) timedatectl set-timezone Europe/Amsterdam ;;
16) timedatectl set-timezone Europe/Madrid ;;
21) timedatectl set-timezone America/Los_Angeles ;;
22) timedatectl set-timezone America/New_York ;;
23) timedatectl set-timezone America/Vancouver ;;
24) timedatectl set-timezone America/Mexico_City ;;
25) timedatectl set-timezone America/Sao_Paulo ;;
26) timedatectl set-timezone America/Argentina/Buenos_Aires ;;
0) break ;; # 跳出循环，退出菜单
*) break ;; # 跳出循环，退出菜单
esac
done
;;
16)
if dpkg -l | grep -q 'linux-xanmod'; then
while true; do
clear
kernel_version=$(uname -r)
echo "您已安装xanmod的BBRv3内核"
echo "当前内核版本: $kernel_version"
echo ""
echo "内核管理"
echo "------------------------"
echo "1. 更新BBRv3内核 2. 卸载BBRv3内核"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
apt purge -y 'linux-*xanmod1*'
update-grub
# wget -qO - https://dl.xanmod.org/archive.key | gpg --dearmor -o /usr/share/keyrings/xanmod-archive-keyring.gpg --yes
wget -qO - https://raw.gitmirror.com/kejilion/sh/main/archive.key | gpg --dearmor -o /usr/share/keyrings/xanmod-archive-keyring.gpg --yes
# 步骤3：添加存储库
echo 'deb [signed-by=/usr/share/keyrings/xanmod-archive-keyring.gpg] http://deb.xanmod.org releases main' | tee /etc/apt/sources.list.d/xanmod-release.list
# version=$(wget -q https://dl.xanmod.org/check_x86-64_psabi.sh && chmod +x check_x86-64_psabi.sh && ./check_x86-64_psabi.sh | grep -oP 'x86-64-v\K\d+|x86-64-v\d+')
version=$(wget -q https://raw.gitmirror.com/kejilion/sh/main/check_x86-64_psabi.sh && chmod +x check_x86-64_psabi.sh && ./check_x86-64_psabi.sh | grep -oP 'x86-64-v\K\d+|x86-64-v\d+')
apt update -y
apt install -y linux-xanmod-x64v$version
echo "XanMod内核已更新。重启后生效"
rm -f /etc/apt/sources.list.d/xanmod-release.list
rm -f check_x86-64_psabi.sh*
reboot
;;
2)
apt purge -y 'linux-*xanmod1*'
update-grub
echo "XanMod内核已卸载。重启后生效"
reboot
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
done
else
clear
echo "请备份数据，将为你升级Linux内核开启BBR3"
echo "官网介绍: https://xanmod.org/"
echo "------------------------------------------------"
echo "仅支持Debian/Ubuntu 仅支持x86_64架构"
echo "VPS是512M内存的，请提前添加1G虚拟内存，防止因内存不足失联！"
echo "------------------------------------------------"
read -p "确定继续吗？(Y/N): " choice
case "$choice" in
[Yy])
if [ -r /etc/os-release ]; then
. /etc/os-release
if [ "$ID" != "debian" ] && [ "$ID" != "ubuntu" ]; then
echo "当前环境不支持，仅支持Debian和Ubuntu系统"
break
fi
else
echo "无法确定操作系统类型"
break
fi
# 检查系统架构
arch=$(dpkg --print-architecture)
if [ "$arch" != "amd64" ]; then
echo "当前环境不支持，仅支持x86_64架构"
break
fi
install wget gnupg
# wget -qO - https://dl.xanmod.org/archive.key | gpg --dearmor -o /usr/share/keyrings/xanmod-archive-keyring.gpg --yes
wget -qO - https://raw.gitmirror.com/kejilion/sh/main/archive.key | gpg --dearmor -o /usr/share/keyrings/xanmod-archive-keyring.gpg --yes
# 步骤3：添加存储库
echo 'deb [signed-by=/usr/share/keyrings/xanmod-archive-keyring.gpg] http://deb.xanmod.org releases main' | tee /etc/apt/sources.list.d/xanmod-release.list
# version=$(wget -q https://dl.xanmod.org/check_x86-64_psabi.sh && chmod +x check_x86-64_psabi.sh && ./check_x86-64_psabi.sh | grep -oP 'x86-64-v\K\d+|x86-64-v\d+')
version=$(wget -q https://raw.gitmirror.com/kejilion/sh/main/check_x86-64_psabi.sh && chmod +x check_x86-64_psabi.sh && ./check_x86-64_psabi.sh | grep -oP 'x86-64-v\K\d+|x86-64-v\d+')
apt update -y
apt install -y linux-xanmod-x64v$version
# 步骤5：启用BBR3
cat > /etc/sysctl.conf << EOF
net.core.default_qdisc=fq_pie
net.ipv4.tcp_congestion_control=bbr
EOF
sysctl -p
echo "XanMod内核安装并BBR3启用成功。重启后生效"
rm -f /etc/apt/sources.list.d/xanmod-release.list
rm -f check_x86-64_psabi.sh*
reboot
;;
[Nn])
echo "已取消"
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
fi
;;
17)
if dpkg -l | grep -q iptables-persistent; then
while true; do
clear
echo "防火墙已安装"
echo "------------------------"
iptables -L INPUT
echo ""
echo "防火墙管理"
echo "------------------------"
echo "1. 开放指定端口 2. 关闭指定端口"
echo "3. 开放所有端口 4. 关闭所有端口"
echo "------------------------"
echo "5. IP白名单 6. IP黑名单"
echo "7. 清除指定IP"
echo "------------------------"
echo "9. 卸载防火墙"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
read -p "请输入开放的端口号: " o_port
sed -i "/COMMIT/i -A INPUT -p tcp --dport $o_port -j ACCEPT" /etc/iptables/rules.v4
sed -i "/COMMIT/i -A INPUT -p udp --dport $o_port -j ACCEPT" /etc/iptables/rules.v4
iptables-restore < /etc/iptables/rules.v4
;;
2)
read -p "请输入关闭的端口号: " c_port
sed -i "/--dport $c_port/d" /etc/iptables/rules.v4
iptables-restore < /etc/iptables/rules.v4
;;
3)
current_port=$(grep -E '^ *Port [0-9]+' /etc/ssh/sshd_config | awk '{print $2}')
cat > /etc/iptables/rules.v4 << EOF
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A FORWARD -i lo -j ACCEPT
-A INPUT -p tcp --dport $current_port -j ACCEPT
COMMIT
EOF
iptables-restore < /etc/iptables/rules.v4
;;
4)
current_port=$(grep -E '^ *Port [0-9]+' /etc/ssh/sshd_config | awk '{print $2}')
cat > /etc/iptables/rules.v4 << EOF
*filter
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A FORWARD -i lo -j ACCEPT
-A INPUT -p tcp --dport $current_port -j ACCEPT
COMMIT
EOF
iptables-restore < /etc/iptables/rules.v4
;;
5)
read -p "请输入放行的IP: " o_ip
sed -i "/COMMIT/i -A INPUT -s $o_ip -j ACCEPT" /etc/iptables/rules.v4
iptables-restore < /etc/iptables/rules.v4
;;
6)
read -p "请输入封锁的IP: " c_ip
sed -i "/COMMIT/i -A INPUT -s $c_ip -j DROP" /etc/iptables/rules.v4
iptables-restore < /etc/iptables/rules.v4
;;
7)
read -p "请输入清除的IP: " d_ip
sed -i "/-A INPUT -s $d_ip/d" /etc/iptables/rules.v4
iptables-restore < /etc/iptables/rules.v4
;;
9)
remove iptables-persistent
rm /etc/iptables/rules.v4
break
# echo "防火墙已卸载，重启生效"
# reboot
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
done
else
clear
echo "将为你安装防火墙，该防火墙仅支持Debian/Ubuntu"
echo "------------------------------------------------"
read -p "确定继续吗？(Y/N): " choice
case "$choice" in
[Yy])
if [ -r /etc/os-release ]; then
. /etc/os-release
if [ "$ID" != "debian" ] && [ "$ID" != "ubuntu" ]; then
echo "当前环境不支持，仅支持Debian和Ubuntu系统"
break
fi
else
echo "无法确定操作系统类型"
break
fi
clear
iptables_open
remove iptables-persistent ufw
rm /etc/iptables/rules.v4
apt update -y && apt install -y iptables-persistent
current_port=$(grep -E '^ *Port [0-9]+' /etc/ssh/sshd_config | awk '{print $2}')
cat > /etc/iptables/rules.v4 << EOF
*filter
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A FORWARD -i lo -j ACCEPT
-A INPUT -p tcp --dport $current_port -j ACCEPT
COMMIT
EOF
iptables-restore < /etc/iptables/rules.v4
systemctl enable netfilter-persistent
echo "防火墙安装完成"
;;
[Nn])
echo "已取消"
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
fi
;;
18)
clear
current_hostname=$(hostname)
echo "当前主机名: $current_hostname"
read -p "是否要更改主机名？(y/n): " answer
if [ "$answer" == "y" ]; then
# 获取新的主机名
read -p "请输入新的主机名: " new_hostname
if [ -n "$new_hostname" ]; then
if [ -f /etc/alpine-release ]; then
# Alpine
echo "$new_hostname" > /etc/hostname
hostname "$new_hostname"
else
# 其他系统，如 Debian, Ubuntu, CentOS 等
hostnamectl set-hostname "$new_hostname"
sed -i "s/$current_hostname/$new_hostname/g" /etc/hostname
systemctl restart systemd-hostnamed
fi
echo "主机名已更改为: $new_hostname"
else
echo "无效的主机名。未更改主机名。"
exit 1
fi
else
echo "未更改主机名。"
fi
;;
19)
# 获取系统信息
source /etc/os-release
# 定义 Ubuntu 更新源
aliyun_ubuntu_source="http://mirrors.aliyun.com/ubuntu/"
official_ubuntu_source="http://archive.ubuntu.com/ubuntu/"
initial_ubuntu_source=""
# 定义 Debian 更新源
aliyun_debian_source="http://mirrors.aliyun.com/debian/"
official_debian_source="http://deb.debian.org/debian/"
initial_debian_source=""
# 定义 CentOS 更新源
aliyun_centos_source="http://mirrors.aliyun.com/centos/"
official_centos_source="http://mirror.centos.org/centos/"
initial_centos_source=""
# 获取当前更新源并设置初始源
case "$ID" in
ubuntu)
initial_ubuntu_source=$(grep -E '^deb ' /etc/apt/sources.list | head -n 1 | awk '{print $2}')
;;
debian)
initial_debian_source=$(grep -E '^deb ' /etc/apt/sources.list | head -n 1 | awk '{print $2}')
;;
centos)
initial_centos_source=$(awk -F= '/^baseurl=/ {print $2}' /etc/yum.repos.d/CentOS-Base.repo | head -n 1 | tr -d ' ')
;;
*)
echo "未知系统，无法执行切换源脚本"
exit 1
;;
esac
# 备份当前源
backup_sources() {
case "$ID" in
ubuntu)
cp /etc/apt/sources.list /etc/apt/sources.list.bak
;;
debian)
cp /etc/apt/sources.list /etc/apt/sources.list.bak
;;
centos)
if [ ! -f /etc/yum.repos.d/CentOS-Base.repo.bak ]; then
cp /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.bak
else
echo "备份已存在，无需重复备份"
fi
;;
*)
echo "未知系统，无法执行备份操作"
exit 1
;;
esac
echo "已备份当前更新源为 /etc/apt/sources.list.bak 或 /etc/yum.repos.d/CentOS-Base.repo.bak"
}
# 还原初始更新源
restore_initial_source() {
case "$ID" in
ubuntu)
cp /etc/apt/sources.list.bak /etc/apt/sources.list
;;
debian)
cp /etc/apt/sources.list.bak /etc/apt/sources.list
;;
centos)
cp /etc/yum.repos.d/CentOS-Base.repo.bak /etc/yum.repos.d/CentOS-Base.repo
;;
*)
echo "未知系统，无法执行还原操作"
exit 1
;;
esac
echo "已还原初始更新源"
}
# 函数：切换更新源
switch_source() {
case "$ID" in
ubuntu)
sed -i 's|'"$initial_ubuntu_source"'|'"$1"'|g' /etc/apt/sources.list
;;
debian)
sed -i 's|'"$initial_debian_source"'|'"$1"'|g' /etc/apt/sources.list
;;
centos)
sed -i "s|^baseurl=.*$|baseurl=$1|g" /etc/yum.repos.d/CentOS-Base.repo
;;
*)
echo "未知系统，无法执行切换操作"
exit 1
;;
esac
}
# 主菜单
while true; do
clear
case "$ID" in
ubuntu)
echo "Ubuntu 更新源切换脚本"
echo "------------------------"
;;
debian)
echo "Debian 更新源切换脚本"
echo "------------------------"
;;
centos)
echo "CentOS 更新源切换脚本"
echo "------------------------"
;;
*)
echo "未知系统，无法执行脚本"
exit 1
;;
esac
echo "1. 切换到阿里云源"
echo "2. 切换到官方源"
echo "------------------------"
echo "3. 备份当前更新源"
echo "4. 还原初始更新源"
echo "------------------------"
echo "0. 返回上一级"
echo "------------------------"
read -p "请选择操作: " choice
case $choice in
1)
backup_sources
case "$ID" in
ubuntu)
switch_source $aliyun_ubuntu_source
;;
debian)
switch_source $aliyun_debian_source
;;
centos)
switch_source $aliyun_centos_source
;;
*)
echo "未知系统，无法执行切换操作"
exit 1
;;
esac
echo "已切换到阿里云源"
;;
2)
backup_sources
case "$ID" in
ubuntu)
switch_source $official_ubuntu_source
;;
debian)
switch_source $official_debian_source
;;
centos)
switch_source $official_centos_source
;;
*)
echo "未知系统，无法执行切换操作"
exit 1
;;
esac
echo "已切换到官方源"
;;
3)
backup_sources
case "$ID" in
ubuntu)
switch_source $initial_ubuntu_source
;;
debian)
switch_source $initial_debian_source
;;
centos)
switch_source $initial_centos_source
;;
*)
echo "未知系统，无法执行切换操作"
exit 1
;;
esac
echo "已切换到初始更新源"
;;
4)
restore_initial_source
;;
0)
break
;;
*)
echo "无效的选择，请重新输入"
;;
esac
break_end
done
;;
20)
while true; do
clear
echo "定时任务列表"
crontab -l
echo ""
echo "操作"
echo "------------------------"
echo "1. 添加定时任务 2. 删除定时任务"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
read -p "请输入新任务的执行命令: " newquest
echo "------------------------"
echo "1. 每周任务 2. 每天任务"
read -p "请输入你的选择: " dingshi
case $dingshi in
1)
read -p "选择周几执行任务？ (0-6，0代表星期日): " weekday
(crontab -l ; echo "0 0 * * $weekday $newquest") | crontab - > /dev/null 2>&1
;;
2)
read -p "选择每天几点执行任务？（小时，0-23）: " hour
(crontab -l ; echo "0 $hour * * * $newquest") | crontab - > /dev/null 2>&1
;;
*)
break # 跳出
;;
esac
;;
2)
read -p "请输入需要删除任务的关键字: " kquest
crontab -l | grep -v "$kquest" | crontab -
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
done
;;
21)
while true; do
clear
echo "本机host解析列表"
echo "如果你在这里添加解析匹配，将不再使用动态解析了"
cat /etc/hosts
echo ""
echo "操作"
echo "------------------------"
echo "1. 添加新的解析 2. 删除解析地址"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " host_dns
case $host_dns in
1)
read -p "请输入新的解析记录 格式: 110.25.5.33 kejilion.pro : " addhost
echo "$addhost" >> /etc/hosts
;;
2)
read -p "请输入需要删除的解析内容关键字: " delhost
sed -i "/$delhost/d" /etc/hosts
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
done
;;
22)
if [ -x "$(command -v fail2ban-client)" ] && [ -d "/etc/fail2ban" ]; then
while true; do
clear
echo "SSH防御程序已启动"
echo "------------------------"
echo "1. 查看SSH拦截记录"
echo "2. 日志实时监控"
echo "------------------------"
echo "9. 卸载防御程序"
echo "------------------------"
echo "0. 退出"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
echo "------------------------"
fail2ban-client status sshd
echo "------------------------"
;;
2)
tail -f /var/log/fail2ban.log
break
;;
9)
remove fail2ban
break
;;
0)
break
;;
*)
echo "无效的选择，请重新输入。"
;;
esac
break_end
done
else
clear
echo "fail2ban是一个SSH防止暴力破解工具"
echo "官网介绍: https://hub.gitmirror.com/https://github.com/fail2ban/fail2ban"
echo "------------------------------------------------"
echo "工作原理：研判非法IP恶意高频访问SSH端口，自动进行IP封锁"
echo "------------------------------------------------"
read -p "确定继续吗？(Y/N): " choice
case "$choice" in
[Yy])
clear
install epel-release fail2ban
if grep -q 'Alpine' /etc/issue; then
echo "当前系统为Alpine 将采用默认配置"
else
rm -rf /etc/fail2ban/jail.d/*
cd /etc/fail2ban/jail.d/
curl -sS -O https://raw.gitmirror.com/kejilion/sh/main/sshd.local
fi
systemctl start fail2ban
service fail2ban start
systemctl enable fail2ban
rc-update add fail2ban
sleep 1
fail2ban-client status
echo "Fail2Ban防御程序已开启"
;;
[Nn])
echo "已取消"
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
fi
;;
31)
clear
install sshpass
remote_ip="66.42.61.110"
remote_user="liaotian123"
remote_file="/home/liaotian123/liaotian.txt"
password="kejilionYYDS" # 替换为您的密码
clear
echo "科技lion留言板"
echo "------------------------"
# 显示已有的留言内容
sshpass -p "${password}" ssh -o StrictHostKeyChecking=no "${remote_user}@${remote_ip}" "cat '${remote_file}'"
echo ""
echo "------------------------"
# 判断是否要留言
read -p "是否要留言？(y/n): " leave_message
if [ "$leave_message" == "y" ] || [ "$leave_message" == "Y" ]; then
# 输入新的留言内容
read -p "输入你的昵称: " nicheng
read -p "输入你的聊天内容: " neirong
# 添加新留言到远程文件
sshpass -p "${password}" ssh -o StrictHostKeyChecking=no "${remote_user}@${remote_ip}" "echo -e '${nicheng}: ${neirong}' >> '${remote_file}'"
echo "已添加留言: "
echo "${nicheng}: ${neirong}"
echo ""
else
echo "您选择了不留言。"
fi
echo "留言板操作完成。"
;;
99)
clear
echo "正在重启服务器，即将断开SSH连接"
reboot
;;
0)
kejilion
;;
*)
echo "无效的输入!"
;;
esac
break_end
done
;;
14)
clear
while true; do
clear
echo "▶ VPS集群控制"
echo "你可以远程操控多台VPS一起执行任务（仅支持Ubuntu/Debian）"
echo "------------------------"
echo "1. 安装集群环境"
echo "------------------------"
echo "2. 集群控制中心"
echo "------------------------"
echo "7. 备份集群环境"
echo "8. 还原集群环境"
echo "9. 卸载集群环境"
echo "------------------------"
echo "0. 返回主菜单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
clear
install python3 python3-paramiko speedtest-cli lrzsz
mkdir cluster && cd cluster
touch servers.py
cat > ./servers.py << EOF
servers = [
]
EOF
;;
2)
while true; do
clear
echo "集群服务器列表"
cat ~/cluster/servers.py
echo ""
echo "操作"
echo "------------------------"
echo "1. 添加服务器 2. 删除服务器 3. 编辑服务器"
echo "------------------------"
echo "11. 安装科技lion脚本 12. 更新系统 13. 清理系统"
echo "14. 安装docker 15. 安装BBR3 16. 设置1G虚拟内存"
echo "17. 设置时区到上海 18. 开放所有端口"
echo "------------------------"
echo "51. 自定义指令"
echo "------------------------"
echo "0. 返回上一级选单"
echo "------------------------"
read -p "请输入你的选择: " sub_choice
case $sub_choice in
1)
read -p "服务器名称: " server_name
read -p "服务器IP: " server_ip
read -p "服务器端口（22）: " server_port
server_port=${server_port:-22}
read -p "服务器用户名（root）: " server_username
server_username=${server_username:-root}
read -p "服务器用户密码: " server_password
sed -i "/servers = \[/a\ {\"name\": \"$server_name\", \"hostname\": \"$server_ip\", \"port\": $server_port, \"username\": \"$server_username\", \"password\": \"$server_password\", \"remote_path\": \"/home/\"}," ~/cluster/servers.py
;;
2)
read -p "请输入需要删除的关键字: " rmserver
sed -i "/$rmserver/d" ~/cluster/servers.py
;;
3)
install nano
nano ~/cluster/servers.py
;;
11)
py_task=install_kejilion.py
cluster_python3
;;
12)
py_task=update.py
cluster_python3
;;
13)
py_task=clean.py
cluster_python3
;;
14)
py_task=install_docker.py
cluster_python3
;;
15)
py_task=install_bbr3.py
cluster_python3
;;
16)
py_task=swap1024.py
cluster_python3
;;
17)
py_task=time_shanghai.py
cluster_python3
;;
18)
py_task=firewall_close.py
cluster_python3
;;
51)
read -p "请输入批量执行的命令: " mingling
py_task=custom_tasks.py
cd ~/cluster/
curl -sS -O https://raw.gitmirror.com/kejilion/python-for-vps/main/cluster/$py_task
sed -i "s#Customtasks#$mingling#g" ~/cluster/$py_task
python3 ~/cluster/$py_task
;;
0)
break # 跳出循环，退出菜单
;;
0)
break # 跳出循环，退出菜单
;;
*)
break # 跳出循环，退出菜单
;;
esac
done
;;
7)
clear
echo "将下载服务器列表数据，按任意键下载！"
read -n 1 -s -r -p ""
sz -y ~/cluster/servers.py
;;
8)
clear
echo "请上传您的servers.py，按任意键开始上传！"
read -n 1 -s -r -p ""
cd ~/cluster/
rz -y
;;
9)
clear
read -p "请先备份环境，确定要卸载集群控制环境吗？(Y/N): " choice
case "$choice" in
[Yy])
remove python3-paramiko speedtest-cli lrzsz
rm -rf ~/cluster/
;;
[Nn])
echo "已取消"
;;
*)
echo "无效的选择，请输入 Y 或 N。"
;;
esac
;;
0)
kejilion
;;
*)
echo "无效的输入!"
;;
esac
break_end
done
;;
p)
cd ~
curl -sS -O https://raw.gitmirror.com/kejilion/sh/main/palworld.sh && chmod +x palworld.sh && ./palworld.sh
exit
;;
00)
cd ~
curl -sS -O https://raw.gitmirror.com/kejilion/sh/main/update_log.sh && chmod +x update_log.sh && ./update_log.sh
rm update_log.sh
echo ""
curl -sS -O https://raw.gitmirror.com/kejilion/sh/main/kejilion.sh && chmod +x kejilion.sh
echo "脚本已更新到最新版本！"
break_end
kejilion
;;
0)
clear
exit
;;
*)
echo "无效的输入!"
;;
esac
break_end
done
服务器优化脚本
#! /bin/bash
# By BlueSkyXN
#https://github.com/BlueSkyXN/SKY-BOX
#彩色
red(){
echo -e "\033[31m\033[01m$1\033[0m"
}
green(){
echo -e "\033[32m\033[01m$1\033[0m"
}
yellow(){
echo -e "\033[33m\033[01m$1\033[0m"
}
blue(){
echo -e "\033[34m\033[01m$1\033[0m"
}
#IPV.SH ipv4/6优先级调整一键脚本·下载
function ipvsh(){
wget -O "/root/ipv.sh" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/ipv.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/ipv.sh"
chmod 777 "/root/ipv.sh"
blue "下载完成"
blue "输入 bash /root/ipv.sh 来运行"
}
#IPT.SH iptable一键脚本·下载
function iptsh(){
wget -O "/root/ipt.sh" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/ipt.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/ipt.sh"
chmod 777 "/root/ipt.sh"
blue "下载完成"
blue "输入 bash /root/ipt.sh 来运行"
}
#Speedtest for Linux·下载
function speedtest-linux(){
wget -O "/root/speedtest" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/speedtest" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/speedtest"
chmod 777 "/root/speedtest"
blue "下载完成"
blue "输入 /root/speedtest 来运行"
}
#获取本机IP
function getip(){
echo
curl ip.p3terx.com
echo
}
#安装最新BBR内核·使用YUM
function bbrnew(){
wget -O "/root/bbr.sh" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/bbr.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/bbr.sh"
chmod 777 "/root/bbr.sh"
blue "下载完成，开始运行"
bash "/root/bbr.sh"
blue "BBR内核安装结束，开始修复grub"
yum install -y grub
grub-mkconfig -o /boot/grub/grub.conf
yum install -y grub2
grub2-mkconfig -o /boot/grub2/grub.cfg
blue "修复grub完成，显示内核参数如下"
echo " =================================================="
yellow "当前正在使用的内核"
uname -a
echo " =================================================="
yellow "系统已经安装的全部内核"
rpm -qa | grep kernel
echo " =================================================="
yellow "可使用的内核列表"
awk -F\' '$1=="menuentry " {print i++ " : " $2}' /etc/grub2.cfg
echo " =================================================="
yellow "当前默认内核启动项"
echo
grub2-editenv list
echo " =================================================="
yellow "请自行重启后启动BBR加速"
echo " =================================================="
}
#启动BBR FQ算法
function bbrfq(){
remove_bbr_lotserver
echo "net.core.default_qdisc=fq" >> /etc/sysctl.d/99-sysctl.conf
echo "net.ipv4.tcp_congestion_control=bbr" >> /etc/sysctl.d/99-sysctl.conf
sysctl --system
echo -e "BBR+FQ修改成功，重启生效！"
}
#系统网络配置优化
function system-best(){
sed -i '/net.ipv4.tcp_retries2/d' /etc/sysctl.conf
sed -i '/net.ipv4.tcp_slow_start_after_idle/d' /etc/sysctl.conf
sed -i '/net.ipv4.tcp_fastopen/d' /etc/sysctl.conf
sed -i '/fs.file-max/d' /etc/sysctl.conf
sed -i '/fs.inotify.max_user_instances/d' /etc/sysctl.conf
sed -i '/net.ipv4.tcp_syncookies/d' /etc/sysctl.conf
sed -i '/net.ipv4.tcp_fin_timeout/d' /etc/sysctl.conf
sed -i '/net.ipv4.tcp_tw_reuse/d' /etc/sysctl.conf
sed -i '/net.ipv4.tcp_max_syn_backlog/d' /etc/sysctl.conf
sed -i '/net.ipv4.ip_local_port_range/d' /etc/sysctl.conf
sed -i '/net.ipv4.tcp_max_tw_buckets/d' /etc/sysctl.conf
sed -i '/net.ipv4.route.gc_timeout/d' /etc/sysctl.conf
sed -i '/net.ipv4.tcp_synack_retries/d' /etc/sysctl.conf
sed -i '/net.ipv4.tcp_syn_retries/d' /etc/sysctl.conf
sed -i '/net.core.somaxconn/d' /etc/sysctl.conf
sed -i '/net.core.netdev_max_backlog/d' /etc/sysctl.conf
sed -i '/net.ipv4.tcp_timestamps/d' /etc/sysctl.conf
sed -i '/net.ipv4.tcp_max_orphans/d' /etc/sysctl.conf
sed -i '/net.ipv4.ip_forward/d' /etc/sysctl.conf
echo "net.ipv4.tcp_retries2 = 8
net.ipv4.tcp_slow_start_after_idle = 0
fs.file-max = 1000000
fs.inotify.max_user_instances = 8192
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_tw_reuse = 1
net.ipv4.ip_local_port_range = 1024 65000
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.tcp_max_tw_buckets = 6000
net.ipv4.route.gc_timeout = 100
net.ipv4.tcp_syn_retries = 1
net.ipv4.tcp_synack_retries = 1
net.core.somaxconn = 32768
net.core.netdev_max_backlog = 32768
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_max_orphans = 32768
# forward ipv4
#net.ipv4.ip_forward = 1">>/etc/sysctl.conf
sysctl -p
echo "* soft nofile 1000000
* hard nofile 1000000">/etc/security/limits.conf
echo "ulimit -SHn 1000000">>/etc/profile
read -p "需要重启VPS后，才能生效系统优化配置，是否现在重启 ? [Y/n] :" yn
[ -z "${yn}" ] && yn="y"
if [[ $yn == [Yy] ]]; then
echo -e "${Info} VPS 重启中..."
reboot
fi
}
#MT.SH 流媒体解锁测试
function mtsh(){
#安装JQ
if [ -e "/etc/redhat-release" ];then
yum install epel-release -y -q > /dev/null;
yum install jq -y -q > /dev/null;
elif [[ $(cat /etc/os-release | grep '^ID=') =~ ubuntu ]] || [[ $(cat /etc/os-release | grep '^ID=') =~ debian ]];then
apt-get update -y > /dev/null;
apt-get install jq > /dev/null;
else
echo -e "${Font_Red}请手动安装jq${Font_Suffix}";
exit;
fi
jq -V > /dev/null 2>&1;
if [ $? -ne 0 ];then
echo -e "${Font_Red}请手动安装jq${Font_Suffix}";
exit;
fi
wget -O "/root/mt.sh" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/mt.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/mt.sh"
chmod 777 "/root/mt.sh"
blue "下载完成"
blue "你也可以输入 bash /root/mt.sh 来手动运行"
bash /root/mt.sh
}
#Rclone版&Fclone·下载
function clonesh(){
wget -O "/usr/bin/rclone" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/rcloneamd" --no-check-certificate -T 30 -t 5 -d
wget -O "/usr/bin/fclone" "https://raw.githubusercontent.com/BlueSkyXN/RcloneX/master/fclone" --no-check-certificate -T 30 -t 5 -d
chmod +x "/usr/bin/rclone"
chmod +x "/usr/bin/fclone"
chmod 777 "/usr/bin/rclone"
chmod 777 "/usr/bin/fclone"
}
#ChangeSource Linux换源脚本·下载
function cssh(){
wget -O "/root/changesource.sh" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/changesource.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/changesource.sh"
chmod 777 "/root/changesource.sh"
blue "下载完成"
echo
green "请自行输入下面命令切换对应源"
green " =================================================="
echo
green " bash changesource.sh 切换推荐源 "
green " bash changesource.sh cn 切换中科大源 "
green " bash changesource.sh aliyun 切换阿里源 "
green " bash changesource.sh 163 切换网易源 "
green " bash changesource.sh aws 切换AWS亚马逊云源 "
green " bash changesource.sh restore 还原默认源 "
}
#Besttrace 路由追踪·下载
function gettrace(){
wget -O "/root/besttrace" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/besttrace" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/besttrace"
chmod 777 "/root/besttrace"
blue "下载完成"
blue "输入 /root/besttrace 来运行"
}
#Lemonbench 综合测试
function Lemonbench(){
curl -fsL https://ilemonra.in/LemonBenchIntl | bash -s fast
}
#UNIXbench 综合测试
function UNIXbench(){
wget -O "/root/unixbench.sh" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/unixbench.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/unixbench.sh"
chmod 777 "/root/unixbench.sh"
blue "下载完成"
bash "/root/unixbench.sh"
}
#三网Speedtest测速
function 3speed(){
bash <(curl -Lso- https://raw.githubusercontent.com/BlueSkyXN/SpeedTestCN/main/superspeed.sh)
}
#Superbench 综合测试
function superbench(){
wget -O "/root/superbench.sh" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/superbench.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/superbench.sh"
chmod 777 "/root/superbench.sh"
blue "下载完成"
bash "/root/superbench.sh"
}
#Memorytest 内存压力测试
function memorytest(){
yum install wget -y
yum groupinstall "Development Tools" -y
wget https://raw.githubusercontent.com/FunctionClub/Memtester/master/memtester.cpp
blue "下载完成"
gcc -l stdc++ memtester.cpp
./a.out
}
#NEZHA.SH哪吒面板/探针·下载
function nezha(){
wget -O "/root/nezha.sh" "https://raw.githubusercontent.com/BlueSkyXN/nezha/master/script/install.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/nezha.sh"
chmod 777 "/root/nezha.sh"
blue "你也可以输入 bash /root/nezha.sh 来手动运行"
blue "下载完成"
bash "/root/nezha.sh"
}
#Aria2 最强安装与管理脚本
function aria(){
wget -O "/root/aria2.sh" "https://raw.githubusercontent.com/P3TERX/aria2.sh/master/aria2.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/aria2.sh"
chmod 777 "/root/aria2.sh"
blue "你也可以输入 bash /root/aria2.sh 来手动运行"
blue "下载完成"
bash "/root/aria2.sh"
}
#MTP&TLS 一键脚本
function mtp(){
wget -O "/root/mtp.sh" "https://raw.githubusercontent.com/sunpma/mtp/master/mtproxy.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/mtp.sh"
chmod 777 "/root/mtp.sh"
blue "你也可以输入 bash /root/mtp.sh 来手动运行"
blue "下载完成"
bash "/root/mtp.sh"
}
#Rclone官方一键安装脚本
function rc(){
curl https://rclone.org/install.sh | sudo bash
}
#宝塔面板综合安装脚本
function btbox(){
wget -O "/root/btbox.sh" "https://raw.githubusercontent.com/BlueSkyXN/SKY-BOX/main/btbox.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/btbox.sh"
chmod 777 "/root/btbox.sh"
blue "下载完成"
bash "/root/btbox.sh"
}
#宝塔面板 自动磁盘挂载工具
function btdisk(){
wget -O auto_disk.sh http://download.bt.cn/tools/auto_disk.sh && bash auto_disk.sh
}
#Git 新版 安装
function yumgitsh(){
wget -O "/root/yum-git.sh" "https://raw.githubusercontent.com/BlueSkyXN/Yum-Git/main/yum-git.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/yum-git.sh"
chmod 777 "/root/yum-git.sh"
blue "下载完成"
blue "你也可以输入 bash /root/yum-git.sh 来手动运行"
bash "/root/yum-git.sh"
}
#BBR一键管理脚本
function tcpsh(){
wget -O "/root/tcp.sh" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/tcp.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/tcp.sh"
chmod 777 "/root/tcp.sh"
blue "下载完成"
blue "你也可以输入 bash /root/tcp.sh 来手动运行"
bash "/root/tcp.sh"
}
#SWAP一键安装/卸载脚本
function swapsh(){
wget -O "/root/swap.sh" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/swap.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/swap.sh"
chmod 777 "/root/swap.sh"
blue "下载完成"
blue "你也可以输入 bash /root/swap.sh 来手动运行"
bash "/root/swap.sh"
}
#Route-trace 路由追踪测试
function rtsh(){
wget -O "/root/rt.sh" "https://raw.githubusercontent.com/BlueSkyXN/Route-trace/main/rt.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/rt.sh"
chmod 777 "/root/rt.sh"
blue "下载完成"
blue "你也可以输入 bash /root/rt.sh 来手动运行"
bash "/root/rt.sh"
}
#Yabs.sh测试
function yabssh(){
wget -O "/root/yabs.sh" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/yabs.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/yabs.sh"
chmod 777 "/root/yabs.sh"
blue "下载完成"
bash "/root/yabs.sh"
}
#Disk Test 硬盘&系统综合测试
function disktestsh(){
wget -O "/root/disktest.sh" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/disktest.sh" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/disktest.sh"
chmod 777 "/root/disktest.sh"
blue "下载完成"
bash "/root/disktest.sh"
}
#TubeCheck Google/Youtube CDN分配节点测试
function tubecheck(){
wget -O "/root/TubeCheck" "https://raw.githubusercontent.com/BlueSkyXN/ChangeSource/master/TubeCheck" --no-check-certificate -T 30 -t 5 -d
chmod +x "/root/TubeCheck"
chmod 777 "/root/TubeCheck"
blue "下载完成"
red "识别成无信息/NULL/未知等代表为默认的美国本土地区或者不可识别/无服务的中国大陆地区"
"/root/TubeCheck"
}
#RegionRestrictionCheck 流媒体解锁测试
function RegionRestrictionCheck(){
bash <(curl -L -s https://raw.githubusercontent.com/lmc999/RegionRestrictionCheck/main/check.sh)
}
#F2B一键安装脚本
function f2bsh(){
red "卸载请 运行 wget https://raw.githubusercontent.com/FunctionClub/Fail2ban/master/uninstall.sh && bash uninstall.sh"
wget https://raw.githubusercontent.com/FunctionClub/Fail2ban/master/fail2ban.sh && bash fail2ban.sh 2>&1 | tee fail2ban.log
red "卸载请 运行 wget https://raw.githubusercontent.com/FunctionClub/Fail2ban/master/uninstall.sh && bash uninstall.sh"
}
#主菜单
function start_menu(){
clear
red " BlueSkyXN 综合工具箱 Linux Supported ONLY"
green " FROM: https://github.com/BlueSkyXN/SKY-BOX "
green " HELP: https://www.blueskyxn.com/202104/4465.html "
green " USE: wget -O box.sh https://raw.githubusercontent.com/BlueSkyXN/SKY-BOX/main/box.sh && chmod +x box.sh && clear && ./box.sh "
yellow " =================================================="
green " 1. IPV.SH ipv4/6优先级调整一键脚本·下载"
green " 2. IPT.SH iptable一键脚本"
green " 3. SpeedTest-Linux 下载"
green " 4. Rclone&Fclone·下载"
green " 5. ChangeSource Linux换源脚本·下载"
green " 6. Besttrace 路由追踪·下载"
green " 7. NEZHA.SH哪吒面板/探针"
yellow " --------------------------------------------------"
green " 11. 获取本机IP"
green " 12. 安装最新BBR内核·使用YUM·仅支持CentOS"
green " 13. 启动BBR FQ算法"
green " 14. 系统网络配置优化"
green " 15. Git 新版 安装·仅支持CentOS"
green " 16. 宝塔面板 自动磁盘挂载工具"
green " 17. BBR一键管理脚本"
green " 18. SWAP一键安装/卸载脚本"
green " 19. F2B一键安装脚本"
yellow " --------------------------------------------------"
green " 21. Superbench 综合测试"
green " 22. MT.SH 流媒体解锁测试"
green " 23. Lemonbench 综合测试"
green " 24. UNIXbench 综合测试"
green " 25. 三网Speedtest测速"
green " 26. Memorytest 内存压力测试"
green " 27. Route-trace 路由追踪测试"
green " 28. YABS LINUX综合测试"
green " 29. Disk Test 硬盘&系统综合测试"
green " 210.TubeCheck Google/Youtube CDN分配节点测试"
green " 211.RegionRestrictionCheck 流媒体解锁测试"
yellow " --------------------------------------------------"
green " 31. MTP&TLS 一键脚本"
green " 32. Rclone官方一键安装脚本"
green " 33. Aria2 最强安装与管理脚本"
yellow " --------------------------------------------------"
green " 00. 宝塔面板综合安装脚本"
green " =================================================="
green " 0. 退出脚本"
echo
read -p "请输入数字:" menuNumberInput
case "$menuNumberInput" in
1 )
ipvsh
;;
2 )
iptsh
;;
3 )
speedtest-linux
;;
4 )
clonesh
;;
5 )
cssh
;;
6 )
gettrace
;;
7 )
nezha
;;
11 )
getip
;;
12 )
bbrnew
;;
13 )
bbrfq
;;
14 )
system-best
;;
15 )
yumgitsh
;;
16 )
btdisk
;;
17 )
tcpsh
;;
18 )
swapsh
;;
19 )
f2bsh
;;
21 )
superbench
;;
22 )
mtsh
;;
23 )
Lemonbench
;;
24 )
UNIXbench
;;
25 )
3speed
;;
26 )
memorytest
;;
27 )
rtsh
;;
28 )
yabssh
;;
29 )
disktestsh
;;
210 )
tubecheck
;;
211 )
RegionRestrictionCheck
;;
31 )
mtp
;;
32 )
rc
;;
33 )
aria
;;
00 )
btbox
;;
0 )
exit 1
;;
* )
clear
red "请输入正确数字 !"
start_menu
;;
esac
}
start_menu "first"
wget -O box.sh https://raw.githubusercontent.com/BlueSkyXN/SKY-BOX/main/box.sh && chmod +x box.sh && clear && ./box.sh
swap创建脚本
#!/usr/bin/env bash
Green="\033[32m"
Font="\033[0m"
Red="\033[31m"
#root权限
root_need(){
if [[ $EUID -ne 0 ]]; then
echo -e "${Red}Error:This script must be run as root!${Font}"
exit 1
fi
}
#检测ovz
ovz_no(){
if [[ -d "/proc/vz" ]]; then
echo -e "${Red}Your VPS is based on OpenVZ，not supported!${Font}"
exit 1
fi
}
add_swap(){
echo -e "${Green}请输入需要添加的swap，建议为内存的2倍！${Font}"
read -p "请输入swap数值:" swapsize
#检查是否存在swapfile
grep -q "swapfile" /etc/fstab
#如果不存在将为其创建swap
if [ $? -ne 0 ]; then
echo -e "${Green}swapfile未发现，正在为其创建swapfile${Font}"
fallocate -l ${swapsize}M /swapfile
chmod 600 /swapfile
mkswap /swapfile
swapon /swapfile
echo '/swapfile none swap defaults 0 0' >> /etc/fstab
echo -e "${Green}swap创建成功，并查看信息：${Font}"
cat /proc/swaps
cat /proc/meminfo | grep Swap
else
echo -e "${Red}swapfile已存在，swap设置失败，请先运行脚本删除swap后重新设置！${Font}"
fi
}
del_swap(){
#检查是否存在swapfile
grep -q "swapfile" /etc/fstab
#如果存在就将其移除
if [ $? -eq 0 ]; then
echo -e "${Green}swapfile已发现，正在将其移除...${Font}"
sed -i '/swapfile/d' /etc/fstab
echo "3" > /proc/sys/vm/drop_caches
swapoff -a
rm -f /swapfile
echo -e "${Green}swap已删除！${Font}"
else
echo -e "${Red}swapfile未发现，swap删除失败！${Font}"
fi
}
#开始菜单
main(){
root_need
ovz_no
clear
echo -e "———————————————————————————————————————"
echo -e "${Green}Linux VPS一键添加/删除swap脚本${Font}"
echo -e "${Green}1、添加swap${Font}"
echo -e "${Green}2、删除swap${Font}"
echo -e "———————————————————————————————————————"
read -p "请输入数字 [1-2]:" num
case "$num" in
1)
add_swap
;;
2)
del_swap
;;
*)
clear
echo -e "${Green}请输入正确数字 [1-2]${Font}"
main
;;
esac
}
main
创建swap
dd if=/dev/zero of=/swapfile bs=1024 count=8194304
mkswap /swapfile
swapon /swapfile
free -h